1Scope of application

HS-RS-5 horizontal and vertical combustion testing machine is a testing instrument used to test the combustion performance of plastic and non-metallic materials. The laboratory test method for determining the horizontal or vertical combustion performance of plastic and non-metallic material specimens under a 50W flame condition.

IIProduct functional features

1. Programmable controller touch screen+PLC control, realizing multifunctional control/detection/calculation/data display
2. High degree of automation: automatic recording of test time, automatic display of test results, automatic timing, automatic ignition, automatic retraction of the burner after flame application, and the option to turn off the gas

3. When starting, you can choose whether to automatically ignite or not
4. The front, back, up, and down movements of the style clip can be controlled by touch screen. Start, stop, gas, timing, ignition, save, save, lighting, and exhaust are all controlled by touch screen. The experiment can be completed with a light touch of your fingertips
5. The timing button, in conjunction with the PLC, automatically records and stores the combustion time consumed

6. The test time system automatically records and generates test results

3、 Related technical parameters

① Suitable working conditions and main technical indicators of the instrument

Environmental temperature: room temperature~40 ℃; Relative humidity: ≤ 75％；

Supply voltage and power: 220V ± 10% 50HZ power 150W

The horizontal and vertical combustion testing programs can be switched on the touch screen, and the test results can be stored and queried on the touch screen;

The Bunsei lamp automatically ignites, automatically counts, and the ignition time can be set arbitrarily (can be preset on the touch screen)

The inner diameter of the lamp is 9.5mm ± 0.5mm

Before starting the main light, you can choose whether it will automatically ignite

After applying the flame, the Bunsen burner will automatically retract. The option to retract the burner is to choose whether to turn off the gas

Gas source: liquefied petroleum gas (methane gas from the processing industry during arbitration);

Steel plate electrostatic spray box body

More than 0.5 cubic meters (supporting non-standard customization of 0.75m ³, 1m ³ sizes, and stainless steel box bodies)

Instrument weight approximately: 100kg

Working power supply: 220V AC 50HZ

Timing range: 0~999.9s Timing accuracy: 10s ± 0.2s 30s ± 0.2s;

Flame application time: 0~999.9S (adjustable, can be preset on the touch screen)

Remaining Flame Time: 0～999.9S

Remaining burning time: 0～999.9S

Linear combustion rate (V) automatically calculated by PLC, displayed and saved on touch screen

Combustion angle: 0 °, 20 °, 45 ° can be selected

Flame height: 20mm~175mm adjustable

Flame temperature: (100-1000) ℃ adjustable

Gas flow rate: adjustable from 105ml/min to 1000ml/min

Combustion lamp: inner diameter of lamp tube 9.5 ± 0.3mm, length: 100mm ± 10mm

Time device: can be accurate to 0.1S

Position adjustment: the sample holder bracket can be adjusted up and down, left and right, the combustion seat can be adjusted back and forth, and the adjustment stroke is large

Flame calibration device: (optional)

a. Temperature testing range: 0~1000 ℃

b. Flame temperature requirement: The time from 100 ℃± 2 ℃ to 700 ℃± 3 ℃ should be within 23.5 seconds ± 1 second

c. Φ 0.5mm (K-type) nickel chromium/nickel aluminum wire thermocouple, insulated to ground

d. Heat transfer copper block: Ф4.0x6.0mm

Gas alarm system (optional)

Dimensions: Width 1160mm, Depth 600mm, Height 1310 (including feet) mm

Combustion test area volume:>0.5 cubic meters, length * width * height approximately 900mm × 590mm × 1050mm, background black, background illumination ≤ 20Lux

The top is equipped with a silent and anti backflow exhaust device, which can discharge the smoke generated by combustion after the test is completed

② Design standards:

GB-T2408-2008 "Testing of Burning Behavior of Plastics - Horizontal and Vertical Methods" (ANSI/UL94-2006)

GBT10707-2008 "Determination of Rubber Combustion Properties" Method B (i.e. GB-T13488 "Determination of Rubber Combustion Properties - Vertical Combustion Method")

③ Applicable standards:

GJB360B-2009 Test Methods for Electronic and Electrical Components 111

GB/T5169.16-2008

ANSI/UL94

IEC60950-1、

IEC695-2-2

② Design standards:

GB-T2408-2008 "Testing of Burning Behavior of Plastics - Horizontal and Vertical Methods" (ANSI/UL94-2006)

③ Applicable standards:

GB-T13488 "Determination of rubber combustion performance - Vertical combustion method"

GB/T5169.16-2008

ANSI/UL94

IEC60950-1、

IEC695-2-2