VIP member
HTJY-80S Fully Automatic Insulation Oil Dielectric Strength Tester (Three Cups)
HTJY-80S Fully Automatic Insulation Oil Dielectric Strength Tester (Three Cups)
Product details
Product IntroductionProduct Introduction
SF6 gas, as an insulating gas, is non-toxic, non flammable, and has good insulation properties. Its insulation strength is much higher than traditional insulating gases, and it has good arc extinguishing properties. Therefore, it is widely used in SF6 electrical appliances. Due to the high price of SF6 gas and the decomposition of toxic components under the action of electric arc, spark and corona discharge. Therefore, SF6 gas needs to be recovered when applying SF6 electrical equipment. The SF6 gas recovery device is a specialized equipment used for the recovery and filling of SF6 gas during the manufacturing and maintenance of SF6 electrical equipment.
The SF6 gas recovery device is suitable for vacuuming, inflating, recharging, purifying, and recovering sulfur hexafluoride gas in SF6 electrical equipment.
The SF6 gas recovery device consists of SF6 gas recovery equipment. The main advantages of the product involved are the ability to directly store the recovered SF6 gas in liquid form in a container, and the ability to recover the residual pressure inside the GIS to 53Kpa (absolute pressure). It has a small volume, is easy to move and place, has a fast vacuum pumping speed, can dry and filter the recovered SF6 gas, and can also recharge SF6 gas to SF6 electrical equipment.
Product nickname: SF6 gas recovery device
Product parametersProduct Parameters
Technical Parameter
| recycle | Recovery initial pressure ≤ 0.8MPa |
| Recovery final pressure ≤ 50KPa | |
| Recycling time: 1 meter for an initial pressure of 0.8 MPa3SF6 gas volume, recovered to a final pressure of 50KPa, with a recovery time of less than 2.5 hours | |
| inflate | For 1 m with an initial pressure of 133Pa3SF6 gas volume is filled to 0.8MPa, and the filling time is less than 0.8 hours |
| vacuum pumping | The maximum vacuum degree of the device is less than or equal to 10 Pa, for 1 m with an initial pressure of 0.1 MPa3The time required to evacuate SF6 gas volume to 133Pa is less than 1.0 hour |
| keep in storage | Storage container capacity 0.05m3 |
| Nominal liquid storage capacity 50kg | |
| Maximum storage pressure 3.8 MPa | |
| purification |
For SF6 gas with a water content of less than 1000PPM (volume ratio), after a single recovery and purification by this device: Moisture content less than 60PPM (weight ratio), oil content less than 10PPM (weight ratio) |
| Annual leakage rate | ≤ 1% nominal storage capacity |
| noise | ≤ 75dB (A) sound pressure level |
| Ambient Temperature | -10℃- 40℃ |
| power supply | AC three-phase five wire system 50Hz 400V ± 10% |
| power | ≤5kW |
| weight | About 545 kg |
| Dimensions (length x width x height) | 1450×810×1200mm3 |
Main component performance parameters
| Indicator Name | SF6 gas recovery device |
| Power supply AC | 380 (three item five line, automatic phase sequence conversion) |
| Rated maximum storage pressure (20 ℃) | ≤4MPa |
| Ultimate vacuum | ≤10Pa |
| Maintain the vacuum degree of the device | Maintain a pressure of 133Pa for 24 hours, and the vacuum degree value increases by less than 400Pa |
| SF6 compressor | French Meiyoule |
| Compressor extraction rate | 7m3/H (customizable) |
| vacuum pump | 2X-4 |
| Vacuum pump pumping rate | 15m3/h |
| The recycling device is adapted to the inlet initial pressure (20 ℃) | 0-1.0MPa |
| Electrical equipment recycling final pressure (20 ℃) | ≤50Kpa |
| Control of gas and oil content after recycling | Domestic oil content<10 μ g/g |
| Annual leakage rate of the device | ＜1% |
| Continuous trouble free operation time of the device | ≥1000h |
| Accumulated fault free operation time | ≥5000h |
| noise level | Whole machine ≤ 75dB (A) |
| Theoretical liquid storage capacity | 50kg |
| Freeze liquefaction compressor | Donper |
| refrigerated storage tank | 50L |
| Recycled gas moisture | 60PPM/V |
| Gas oil fraction after recycling | 10PPM/V |
| Dry filtration method | Vacuum heating activation regeneration |
| Initial inflation pressure | ≤133pa |
| Inflatable final pressure | 0.8mpa |
| inflation rate | ≥5m3/h |
| Gasification method | Electric heating with automatic temperature control |
| Vehicle type | Hand push mobile |
| External dimensions | 1450×810×1200cm3 |
| Whole machine weight | About 545kg |
| Cooling method | forced air cooling |
| Filtration system | Adopting HASON technology from the United States, three-stage filtration can effectively remove moisture, oil, particulate impurities, and dust from the recovered SF6 gas, ensuring the quality of the recovered SF6 gas reuse |
Concise parameter table
| model | SF6 gas recovery device |
| Vacuum pump pumping speed | 15m3/h |
| Ultimate vacuum | 10Pa |
| vacuum pump | Domestic bipolar vacuum pump |
| SF6 recycling compressor | 7m3/h |
| pressure | 2.5MPa |
| Compressor manufacturer | French Meiyoule |
| Filter particles | 0.02 microns |
| Oil content | Efficient (PPM) |
| acid value | 0.1PPM |
| Hydrolyzable fluoride | 0.2PPM |
| Biological toxicity | not have |
| water content | ≤60PPM |
| SF6 purity | ≥99.9% |
| SF6 storage tank | 50L |
| SF6 storage tank material | carbon steel |
| refrigeration system | High quality and efficient compressor |
| filter | Original from the United States |
| dryer | Original from the United States |
| vacuum gauge | pointer |
| valve | Unique technology (built-in butterfly seal to ensure no air leakage during multiple switches) |
Note:
1. The appearance of the product is subject to the actual product. Technical parameters and models are subject to change without prior notice. If there is any act of theft or copying, legal responsibility will be pursued.
2. To learn more about Huatian products, please enter the product center. Service Hotline: 400-8855-448
Product FeaturesProduct Characteristics
- 1. Built in phase sequence protector, which can always eliminate the concern of the host reversing due to phase sequence errors
- 2. All electrical systems use high-quality brands
- 3. High quality casters will greatly protect the floor paint and reduce the manual labor required for pushing
- 4. The whole machine is air-cooled and does not require an external water source
- 5. The built-in temperature protection system can work normally even at -20 degrees Celsius
- 6. Built in drying and heating system ensures that the desiccant can be activated and regenerated through device heating after saturation, eliminating the need to replace the desiccant
Product AtlasProduct Picture
Product Attachment Diagram
host
3-meter pipeline
Cylinder connection line
SF6 adapter
round
Instruction manual, inspection report, certificate of conformity
Product detail diagram
front
front
the back
side
Front instrument panel
Front control box
control panel
right side
Control box button
Control box button
instrument
instrument
instrument
instrument
node control
ring
Side control box
power line
product certificateProduct Certificate
Our company's products are strictly produced in accordance with international and national standards and industry regulations. They have passed the testing of national, provincial, and municipal power research institutes, measurement centers, and authoritative power departments, and have fully passed the ISO9001 international quality management system certification, the People's Republic of China manufacturing measuring instrument license, GB/T19001-2016 quality management system requirements, GB/T24001-2016 environmental management system requirements, and GB/T45001-2020 occupational health and safety management system requirements.
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-