VIP member
HTYND-H fully automatic kinematic viscosity tester
Using a platinum wire ignition head for automatic stop detection of ignition temperature exceeding the value, with alarm prompts, and increased safety
Product details
Product IntroductionProduct Introduction
There are a large number of oil filling equipment in power systems, factories, mines, and enterprises. The flash point of insulating oil is a routine inspection item that must be tested. The HTYKS-H open flash point tester is a replacement of the current open flash point tester for petroleum products. The instrument is designed to measure samples in accordance with the requirements of the national standard GB/T3536-2008, and the entire measurement process is automated. The instrument adopts a large screen LCD display, with accurate measurement and stable performance, which can fully meet the needs of departments such as petrochemicals, power, and scientific research to determine the open flash point of petroleum products. It is very convenient to use and is highly welcomed by oil workers.
Product nickname: Open Flash Point Tester, Fully Automatic Open Flash Point Tester, Automatic Open Flash Point Tester, Fully Automatic Open Flash Point Tester, Automatic Open Flash Point Tester, Open Flash Point Tester
Product parametersProduct Parameters
Technical Parameter
| Temperature measurement range | 30℃ - 400℃ |
| temperature measurement error | ± 1℃ |
| Flash point determination accuracy | ± 8℃ |
| repeatability and reproducibility | Same as GB/T 3536 |
| Whole machine power | Less than 650W |
| External dimensions | 400mm x 350mm x 290mm (length x width x height) |
| Weight | 17kg |
Conditions of Use
| relative humidity | < 85%RH |
| ambient temperature | 0℃ ～ 40℃ |
| Gas | Gas or liquefied petroleum gas, pressure 0.2-0.5MPa |
| supply voltage | 220V ± 22V |
| Power frequency | 50Hz ± 1Hz |
Note:
1. The appearance of the product is subject to the actual product. Technical parameters and models are subject to change without prior notice. If there is any act of theft or copying, legal responsibility will be pursued.
2. To learn more about Huatian products, please enter the product center. Service Hotline: 400-8855-448
Product FeaturesProduct Characteristics
- 1. Equipped with a 5.7-inch LCD display, Chinese menu prompts, simple operation, needle printer, automatic printing of test results
- 2. Using a platinum wire ignition head for ignition
- 3. Automatic stop detection and alarm prompt for temperature exceeding value, increasing safety
- 4. Automatic atmospheric pressure correction for flash point value
- 5. Automatically ignite according to the testing process, and start strong air cooling immediately after the test is completed
- 6. Standard RS232 interface, communicates with the upper computer through dedicated software
Product videoProduct Video
Product AtlasProduct Picture
Product Attachment Diagram
host
Test cup
fuse
power line
printing paper
Instruction manual, inspection certificate, certificate of conformity
Product detail diagram
host
front
display
printer
Testing area
power switch
terminal
product certificateProduct Certificate
Our company's products are strictly produced in accordance with international and national standards and industry regulations. They have passed the testing of national, provincial, and municipal power research institutes, measurement centers, and authoritative power departments, and have fully passed the ISO9001 international quality management system certification, the People's Republic of China manufacturing measuring instrument license, GB/T19001-2016 quality management system requirements, GB/T24001-2016 environmental management system requirements, and GB/T45001-2020 occupational health and safety management system requirements.
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-