VIP member
HVS-1000A Digital Microhardness Tester
The instrument adopts a unique and precise design in mechanics, optics, and light sources, making indentation imaging clearer and measurement more acc
Product details
| Main technical specifications: | |
| Experimental force: | 0.098、0.246、0.49、0.98、1.96、2.94、4.90、9.80）N 10、25、50、100、200、300、500、1000）gf |
| Test force loading and unloading control: | Fully automatic (loading/holding/unloading) |
| Rotating tower method: | Automatic turret |
| Magnification of measuring microscope: | 400 times, 100 times |
| Test force holding time: | （5～60）S |
| Micrometer drum * * small division value: | 0.0625μm |
| Measurement range: | 1HV～3000HV |
| XY test bench size: | 100×100 mm |
| XY test bench travel range: | 25×25 mm |
| Test piece * * Large height: | 100mm |
| Test piece * * large width: | 95mm |
| light source | Cold light source/halogen lamp |
| Power Supply: | 110V/220V,60/50Hz |
| Size: | 480×325×545mm |
| Standard configuration: | |||
| Microscopic Vickers indenter: | 1 piece | Objective lens (10x, 40x): | one each |
| 10 x digital micrometer eyepiece: | 1 piece | Cross test bench: | 1 piece |
| Thin film clamping table: | 1 piece | Flat mouth clamping table: | 1 piece |
| Fine wire clamping table: | 1 piece | Horizontal adjustment screw: | 4 pieces |
| level: | 1 piece | Vickers hardness block: | 2 pieces |
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-