Product Introduction
The HXBA-800 blue-green algae sensor utilizes the characteristic of blue-green algae having absorption and emission peaks in the spectrum, emitting monochromatic light of a specific wavelength into water. The blue-green algae in the water absorb the energy of this monochromatic light and release monochromatic light of another wavelength. The intensity of blue-green algae emission is proportional to the content of blue-green algae in the water.
Product Features
Based on the fluorescence measurement of pigments, target parameters can be identified before potential harmful algal blooms occur;
No need for extraction or other processing, rapid detection, avoiding the impact of storing water samples;
Digital sensors with strong anti-interference ability and long transmission distance;
Standard digital signal output, which can be integrated and networked with other devices without a controller;
The on-site installation of sensors is convenient and fast, achieving plug and play functionality.
Typical applications
Online monitoring of blue-green algae in water plant imports, drinking water sources, aquaculture, etc;
Online monitoring of blue-green algae in different water bodies such as surface water and landscape water.
Technical Parameter
|
measuring range
|
100—300,000cells/mL
|
|
measurement accuracy
|
± 5% of the corresponding signal level value for 1 ppb of Rhodamine WT dye
|
|
Pressure Range
|
≤0.4Mpa
|
|
calibration
|
Deviation calibration, slope calibration
|
|
Condition requirements
|
The distribution of blue-green algae in the water is very uneven, and it is recommended to monitor multiple points; The turbidity of the water is below 50NTU.
|
|
Main materials of sensors
|
Body: SUS316L+PVC; O-ring: Fluororubber; Cable: PVC
|
|
power supply
|
AC power supply: 100-240VAC (50/60HZ); DC power supply: 9-36VDC
|
|
output
|
3-channel 4-20mA
|
|
relay
|
Set up three relays, program response parameters and response values
|
|
Communication protocol
|
MODBUS RS485
|
|
storage temperature
|
-15 to 65 ℃
|
|
operation temperature
|
0 to 45 ℃
|
|
size
|
Sensor: Diameter 37mm * Length 220mm
Transmitter: 145 * 125 * 162mm (length * width * height)
|
|
weight
|
Sensor: 0.8KG; Transmitter: 1.35KG
|
|
protection grade
|
Sensor: IP68/NEMA6P； Transmitter: IP65/NEMA4X
|
|
Cable Length
|
Standard 10 meter cable, extendable up to 100 meters
|
