VIP member
HYDRAcap 40 Hollow Fiber Ultrafiltration Membrane Module
The HYDRAcap ultrafiltration process is a water treatment technology with higher filtration accuracy, which can effectively remove bacteria, viruses,
Product details
HYDRAcap®Ultrafiltration process is a water treatment technology with higher filtration accuracy, which can effectively remove bacteria, viruses, macromolecular organic matter, colloids, and particulate matter. It has the characteristics of anti pollution, low dosage of chemicals, high water recovery rate, and small station area. HYDRAcap®The membrane module has obtained certification from the California Department of Health (DHS) for its effectiveness in removing pathogenic microorganisms, with removal rates of over 4Log for viruses, cryptosporidium, and flagellates.
HYDRAcap®Characteristics of ultrafiltration membrane technology
The membrane material is hydrophilic polyether sulfone (PES), which has good pollution resistance
The cutting molecular weight is 150000 daltons, and the separation pore size is about 25nm
● Oxidation resistant agent, acid and alkali resistant range up to pH 2-13
Hollow membrane fibers have high mechanical strength, with a cumulative fiber breakage rate of less than one thousandth over five years
Internal pressure membrane structure, smooth raw water flow channel, less prone to fouling and blockage, easy to clean
Unique water production center pipe structure, reasonable water flow distribution, can significantly extend the service life of membrane fibers
The component has only three pipe openings, which is 1/4 less than the traditional component with four pipe openings, saving pipelines and improving system reliability
The component structure is reasonable, and the membrane cleaning methods are abundant: it can be washed in front or back; It can be backwashed with water, or backwashed with medication or gas
Under most water supply conditions, full filtration can be used to reduce energy consumption and improve water utilization efficiency; When the turbidity of the water supply is high, coarse wire components can be used; When the water supply conditions are too harsh, cross flow filtration can be used.
Has passed international authoritative certification for drinking hygiene - NSF/EPA (National Science Foundation/Environmental Protection Agency), CADHS (California Department of Health), DWI (British Drinking Water Testing Institute), SWTR (Surface Water Treatment Regulations)
HYDRAcap®Optimal scheme for ultrafiltration membrane reverse osmosis pretreatment
The membrane filtration accuracy is much higher than traditional filtration, and can completely remove colloids and particles larger than 0.1 μ m
Has a good removal effect on large organic molecules
● Less affected by fluctuations in raw water quality and stable effluent quality
Low operating pressure, significant energy-saving effect
The equipment occupies a small space, only 1/5~1/3 of traditional processes, and can be operated automatically
It can significantly improve the water production flux of reverse osmosis and save the amount of reverse osmosis membrane used
Significantly reduce the frequency of reverse osmosis cleaning, improve the efficiency and stability of reverse osmosis
Low dosage of pre-treatment chemicals reduces pollution emissions
HYDRAcap®Characteristics of ultrafiltration membrane technology
The membrane material is hydrophilic polyether sulfone (PES), which has good pollution resistance
The cutting molecular weight is 150000 daltons, and the separation pore size is about 25nm
● Oxidation resistant agent, acid and alkali resistant range up to pH 2-13
Hollow membrane fibers have high mechanical strength, with a cumulative fiber breakage rate of less than one thousandth over five years
Internal pressure membrane structure, smooth raw water flow channel, less prone to fouling and blockage, easy to clean
Unique water production center pipe structure, reasonable water flow distribution, can significantly extend the service life of membrane fibers
The component has only three pipe openings, which is 1/4 less than the traditional component with four pipe openings, saving pipelines and improving system reliability
The component structure is reasonable, and the membrane cleaning methods are abundant: it can be washed in front or back; It can be backwashed with water, or backwashed with medication or gas
Under most water supply conditions, full filtration can be used to reduce energy consumption and improve water utilization efficiency; When the turbidity of the water supply is high, coarse wire components can be used; When the water supply conditions are too harsh, cross flow filtration can be used.
Has passed international authoritative certification for drinking hygiene - NSF/EPA (National Science Foundation/Environmental Protection Agency), CADHS (California Department of Health), DWI (British Drinking Water Testing Institute), SWTR (Surface Water Treatment Regulations)
HYDRAcap®Optimal scheme for ultrafiltration membrane reverse osmosis pretreatment
The membrane filtration accuracy is much higher than traditional filtration, and can completely remove colloids and particles larger than 0.1 μ m
Has a good removal effect on large organic molecules
● Less affected by fluctuations in raw water quality and stable effluent quality
Low operating pressure, significant energy-saving effect
The equipment occupies a small space, only 1/5~1/3 of traditional processes, and can be operated automatically
It can significantly improve the water production flux of reverse osmosis and save the amount of reverse osmosis membrane used
Significantly reduce the frequency of reverse osmosis cleaning, improve the efficiency and stability of reverse osmosis
Low dosage of pre-treatment chemicals reduces pollution emissions
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-