Overview of Handheld Pressure Pump:
OW-YSC-30 handheld pressure pump is a handheld hydraulic pressure source generating device that can be used in conjunction with pressure calibrators or precision digital pressure gauges without pressure sources to calibrate pressure instruments such as pressure gauges, pressure (differential pressure) transmitters, pressure switches, etc. It is a stable and reliable pressure source provided on site. The handheld pressure pump can also be used in conjunction with other general pressure gauges for on-site debugging and pressure testing in pressure process control.
Handheld pressure pump parameters:
1. Pressure range: (0～30)MPa
2. Operating temperature:- 20～50 ℃
3. Instrument weight: 1kg;
4. Pressure medium: It is a clean and non corrosive gas
Characteristics of handheld pressure pump:
1. Hand clamp type compression, fast pressure increase.
2. Portable structure, small size, light weight, suitable for on-site operations and laboratory testing.
3. High pressure range and porosity
4. Wide fine-tuning range, high stability performance
5. Imported sealing components with good pressure holding effect.
6. Stainless steel components have a long service life.
Handheld pressure pump operation:
The standard table for side pressure output connection. If the interface is inconsistent, please specify the interface specifications when ordering to facilitate the installation of conversion joints. The pressure outlet on the side is equipped with a medium pressure hose and connector as standard when leaving the factory. The connector specification is M20 × 1.5 (please specify when ordering other specifications), which is connected to the calibrated meter. Tighten the vent valve, use pliers to apply pressure to the desired value, and use a standard gauge as a reference to check if the pressure value on the calibrated gauge is consistent with the standard gauge. Adjust the calibrated gauge using a comparison method.