Product Introduction:
Ziyi Instrument Automation InstrumentHeavy hammer level gaugeThe Monitoring System (SUM) is an intelligent sensing system based on a sturdy steel cable structure. Practice has proven that the system can be reliably applied to level measurement in various silos, storage tanks, and storage tanks, with a maximum measurement depth of 45.7 meters. The maximum measurement depth of the heavy hammer level gauge can reach 45.7 meters. Its core equipment is the sensor unit, which does not require on-site debugging or maintenance. This heavy hammer level gauge equipment is suitable for various working conditions and can be configured with various flanges, heavy hammers, and operation interfaces. If you only need an independent sensor with analog output without the need for an interface display, this is a low-cost configuration option that can be achieved. You can also use a multifunctional human-machine interface (HMI) to match with a standard SMU host with intelligent communication output interface to achieve more functions. When configuring the operation interface of the heavy hammer level gauge, the system can perform calculations and display according to the specified mode, and remotely transmit analog signals or relay signals. The operation section of the SiloPatrol heavy hammer level gauge system is unique, providing a flexible graphical interface for the output signals of up to 128 intelligent sensors, simplifying the output of SMUs and entering PLC/PC control systems.

Product features:
Heavy hammer level gaugeExcellent performance and reliable application, the durability of the mechanical and electronic components of the heavy hammer level gauge meets international standards and has passed the CE1010 standard; The excellent optical sensing system of the MONITOR heavy hammer level gauge is completely sealed to ensure reliable performance and has a user-friendly human-machine cross-sectional design. The heavy hammer level gauge is equipped with a silo management software based on network communication; The heavy hammer level gauge monitoring system can achieve remote monitoring through local area network, internet or dial-up internet; This system adopts industrial design standards and uses smart sensors for data, technology, and system transmission through cables; The MONITOR heavy hammer level gauge is maintenance free, signal isolated, reliable in operation, resistant to noise interference, and driven by a motor. The heavy hammer level gauge has a multifunctional interface, suitable for PC or ActiveX software, and can achieve wireless communication.

Heavy hammer level gauge(Host) Parameters:
Supply voltage: 115 VAC or 230 VAC, 50/60 Hz
Power consumption: 6 VA continuous, 50 VA intermittent
Operating temperature:- 40° F to 150° F (-40° C to 65° C)
Medium temperature: 149 ° C (when using stainless steel cables)/93 ° C (when using stainless steel lined cables)
Measurement range: 45.7 m
Measurement speed: 0.3 m/s
Accuracy:<0.25% of the measured distance
Repeatability: 30 mm
resolving power: 3mm
Flange: “K” flange, 8” dia. w/ 7” bolt circle
Electrical interface: (2) 3/4” NPT
Steel cable: 1/16 nylon protective layer (123kg tension)
3/64 stainless steel (without protective layer) (123kg tension)
1/16 polypropylene protective layer (123kg tension)
Output signal:
Standard output: RS-485 Half Duplex
Wiring distance: 1,220 m
Patrol address: 1-16 (optional switch)
Pulse output: one pulse per 1/10 inch or decimeter,
Analog output: 4-20 mA, 500 Ohms maximum loop impedance
Transport weight: 18.2 kg (regular type)
31.8 kg (explosion-proof type)
Shell material: cast aluminum/Noryl resin coating (ordinary type)
Cast aluminum (explosion-proof type)
Appearance dimensions: height x width x thickness=652 X 289 X 216 mm (regular type)
Height x width x thickness=700 X 333 X 224 mm (explosion-proof type)
Heavy hammer weight: 0.9 kg
Air interface: 1/4 "NPT (explosion-proof type only)
Protection level: NEMA 4; IP66; CE Mark
Explosion proof grade: OL: CSAC/US
HL: CSAC/US Class I, Div. 1 & 2; Groups C & D
Class II, Div. 1 & 2; Groups E, F & G

type name	ZY-ULZC
	Sensor (primary meter)		Control display instrument (secondary meter)
picture a flat
measuring range	0~8/16/32 meters (special specifications can be negotiated)
measurement accuracy	±1％
Repeatability	±1％
Resolution	±3cm		supply voltage	220VAC±10％； 50/60Hz
Detecting speed	0.15m/s		work consume	15W at rest; 105W during exercise (including one meter)
Measurement strip	Stainless steel wire rope		ambient temperature	-30℃~+60℃
Weight of Hammer	1.5kg(0~16m)；2kg(0~32m)		digital display	4-digit LED displays the position of the material surface
Motor stalling torque	5N.m		current output	4~20mA DC (no need to add 24V)
work consume	90W		Timed Time	15-130 minutes (or as per user request)
ambient temperature	-10℃~+60℃		Alarm method	Upper and lower limit alarm (optional)
weight measure	8 meters 50 kg; 16m 60kg; 32m 75kg		weight measure	2kg
Flange standard	JB81-59 outer diameter Φ 195mm aperture Φ 18mm hole center distance Φ 160mm (PN1.0, DN80)		Accuracy of current output signal	±1％
Outlet port	M20x1.5		Dimension	Horizontal: Width 152 × Height 76mm
External dimensions	8 meters in length430x height 220x width 350mm 16 meters in length560x height 220x width 350mm 32 meters: length730x height 220x width 350mm 50 meters: length850x height 220x width 350mm	+Bottom diameter: 195x110, support height: 195x290mm		B Vertical: Width 152 × Height 76mm
			External dimensions	Horizontal: length 280 x width 163 x height 80mm
				B Vertical: Length 280 x Width 80 x Height 163mm