Herz active isolation table Herz active isolation table AVI active isolation table

Herz Active Isolation Platform - Herz Active Isolation Platform - AVI Active Isolation Platform is an excellent isolation system for high load precision scientific research equipment. With a modular and easy to install design, the AVI-400 WORKSTATION's multifunctional high-performance isolation is widely applicable to a large number of instruments and is the best solution for isolation of large-scale nanotechnology instruments. It is an ideal choice for upgrading and integrating into existing equipment that requires low-frequency isolation function. The active damping table active damping table active damping optical platform Hertz avi 400 series can freely choose the size and configuration of the entire system. By increasing the number of isolation modules, the system's load-bearing capacity can be increased (up to 9000 pounds).

Product features:

• Main control frequency 1Hz-200Hz
• Passive anti vibration frequency>200Hz
• Response time of 5-20 milliseconds
• Easy to install and use
• Can be used continuously for many years without any faults
• Controlled through LED display screen

Product application:

• SEM
• TEM
• UHV-SPM
• Photolithography
• Spectral measurement
• High precision measurement
• Other high-precision instruments

Herz active isolation table Herz active isolation table AVI active isolation table product advantages:

• The system actively detects input vibrations and dynamically eliminates them
• Six angles of free vibration isolation
• Internal feedback loop suppresses all mechanical resonances
• Provide excellent low-frequency isolation capability
• No low-frequency resonance and no air requirement

Technical parameters:

Isolation range: active: 1-200Hz; Passive:> 200Hz

Isolation range: Transmission over 10Hz<0.017 (-35 dB)

Module size: W7.5” x D 28” x H 4.5” (AVI-400)

Module weight: 40 KG/88 Lbs

Static flexibility (per module)

Vertical direction: about 1.7 μ m/N

Horizontal direction: about 3.4 μ m/N

System noise: less than 50nG/√ Hz

Power consumption: 18 W (typical configuration)

Input voltage: 90-125 VAC/200-250 VAC, 50 – 60 Hz

Controller size: 48 x 13 x 25 cm/19 x 5.1 x 9.8 "

Performance monitoring: The vibration level with isolation effect is indicated by a multiplexed signal displayed on the oscilloscope

Optional models: