High precision digital low-frequency and high-frequency electromagnetic field intensity analyzer

Product Introduction

NF-5035High precision digital low-frequency and high-frequency electromagnetic field intensity analyzerIt is a high-precision instrument used for detecting and analyzing low-frequency magnetic/magnetic fields (H) and electric/electric fields (E). It adopts innovative specialized technology and is equipped with an ultra high sensitivity 3-axis electric/magnetic field composite sensor,

It has higher accuracy and electric field sensitivity, meets the requirements of Pre Consistency and EMC/EMI detection, and can perform high-precision detection of electric and magnetic field radiation in various low-frequency environments in all directions. The built-in high-performance DSP (digital signal processor) chip can not only accurately display electric field strength, magnetic field strength, power density, and voltage; At the same time, it can also display the percentage of the measured electromagnetic radiation value compared to the standard limit, and the measurement results are clear and intuitive. It can be used to measure electromagnetic radiation in low-frequency fields such as electrical appliances, industrial equipment, induction furnaces, transformers, and power system equipment.

Product Features

-Portable design, lightweight, easy to operate with one hand, convenient for movement or on-site measurement

-Fast FFT/DFT spectrum analysis function

-High precision single axis electric field detector and 3D isotropic electromagnetic field detector, with high sensitivity and fast response, can achieve accurate detection in all directions

-Enhanced new generation high-precision, large-sized LCD display screen, displaying multiple detection results clearly and intuitively

-Multiple display modes: real-time, high value hold, exposure limit calculation and display (DIN/VDE 0848), etc., can simultaneously display frequency and signal strength.

-Built in USB data communication port, combined with data analysis software, can be connected to a computer or even form a real-time electromagnetic radiation monitoring system, achieving continuous multi-point monitoring of electromagnetic radiation

Product Application

-Environmental electromagnetic radiation monitoring

-Electromagnetic field safety monitoring in the workplace

-Electromagnetic safety testing of defense electronic equipment

-Electromagnetic environment monitoring of aerospace equipment

-Traction power

-Power cord and cable

-Transformer

-Power supply and harmonics

-Energy saving light bulb

-Switching power supply

-TFT, LCD displays and televisions

- 135kHz RFID

- DSL

- ADSL

- VDSL

- 13.56MHz RFID

-Electromagnetic testing of household, office, and industrial appliances with various operating frequencies up to 30MHz

Product parameters

Frequency range: Standard configuration includes 1Hz~1MHz (can be increased to 1Hz~20MHz and 1kHz~30MHz)

Magnetic field/Tesla: 1nT~2mT (typical), optional PBS1/2 near-field probe extension,

When selecting a 12 bit 65MSPS dual DDC multi frequency filter: 1pT to 2mT (typ.)

For static magnetic field (Gauss), when selecting the 006 static magnetic field sensor: 10 µ G to 20G (typ.)

When selecting the 00924 bit resolution high-precision static magnetic field sensor: 10nG to 20G (typ.)

Electric field/electric field: 0.1V/m~20kV/m (typical)

Analog input: 2 µ V~200mV (typical)

When selecting a 12 bit 65MSPS dual DDC multi frequency filter: 200nV to 200mV (typical)

Resolution/Resolution (RBW): 0.3Hz~1MHz (steps 1-3-10)

Display units: V, V/m, T, G, A/m

Detector: RMS, Min/Max

Demodulator: AM, FM

Input: High impedance SMA input (f)

Audio: Built in speaker (with volume control and standard 2.5mm jack)

Accuracy: 3% (typical)

Built in data logger: 64K, expandable to 1MB (optional)

Size: 250x86x27mm

Weight: 420g

Product Configuration

Number, Name, Specification, Quantity, and Unit
1 set of electromagnetic compatibility/electromagnetic interference spectrum analyzer NF-5035
2 integrated electric and magnetic field sensors/antennas 1
3 frequency filters 1
4 rechargeable lithium batteries (3000mAh) 1 piece
5 USB cables, 1 piece
6 battery chargers 1
7 aluminum boxes, 1 piece
8 English manuals (CD) 1 book
1 set of real-time control analysis software