High speed feed:By optimizing the double arc contact tooth profile design and combining it with the curvature continuity of the cyclic path, the contour of the raceway surface is corrected due to the centrifugal force effect caused by the high-speed rotation of the ball bearings. It has the performance of high-speed feed (high DN value), high acceleration, and high rigidity. The feed rate reaches over 90 m/min, and the Dm-N value exceeds 150000.

High positioning accuracy:The requirement for high-precision level should reach JIS C3 level or above. High rigidity: Optimize screw profile and structural design. High load: A multi roll continuous cycle steel ball system is used to achieve multi load ball distribution, making it a high load ball screw.

Low vibration noise:Designed with a slender ratio and circular structure.

Acceleration:Above 1.0g (9.8m/sec 2). Constant temperature design: optimized heat dissipation design, effectively suppressing thermal deformation caused by high speed

Environmentally friendly design:Combined with the concept of self lubrication, the environmentally friendly concept has been successfully applied in the development of ball screws, which can also solve the problem of uneven lubrication caused by the deformation of the lubricating oil film on the spiral raceway surface under high-speed motion.