VIP member
High static pressure differential pressure transmitter HQ-1151/3351HP
Brief introduction: The key raw materials, components, and parts of HQ1151/3351HP high static pressure differential pressure transmitter are all impor
Product details
Brief introduction:
The key raw materials, components, and parts of HQ1151/3351HP high static pressure differential pressure transmitter are all imported or jointly produced, and the whole machine has undergone strict assembly and testing. This product features advanced design principles, complete variety and specifications, and easy installation and use.
HQ-1151/3351HP high static pressure differential pressure transmitter
HQ-1151/3351HP High Static Pressure Differential Pressure Transmitter Product Details
The key raw materials, components, and parts of HQ-1151/3351HP high static pressure differential pressure transmitter are all imported or jointly produced, and the whole machine has undergone strict assembly and testing. This product features advanced design principles, complete variety and specifications, and easy installation and use. Due to the complete integration of the structural advantages of the two most popular and widely used transmitters in China (Rosemount 3051 and Yokogawa EJA) in terms of appearance, this model provides users with a refreshing feeling and has strong versatility and substitutability. In order to adapt to the continuous improvement and development of domestic automation level, this series of products not only has a compact and exquisite design, but also introduces intelligent functions with HART fieldbus protocol.
HQ-1151/3351HP High Static Pressure Differential Pressure Transmitter Product Features
Super measurement performance, used for pressure, differential pressure, liquid level, and flow measurement
Accuracy: Soil 0.1%, Soil 0.2%, Soil 0.5%, (Intelligent)
Range and zero point can be continuously adjusted externally, with a range ratio of 100:1
Positive migration can reach 500%, negative migration can reach 600%
Good stability performance, stability: 0.25% for 60 months
Overvoltage resistance
Solid state sensor design
Unified structure and strong interchangeability across the entire series
The membrane material in contact with the medium is optional
Low pressure cast aluminum alloy shell
Measurement rate: 0.2S
Compact (2.4kg) all stainless steel flange, easy to install
Process connectivity is compatible with other products to achieve optimal measurement
Intelligent transmitter using 16 bit computer
Standard 4-20mA, with digital signal based on HART protocol, remote control
Support upgrading to fieldbus and field control based technologies
HQ-1151/3351HP High Static Pressure Differential Pressure Transmitter Product Technical Parameters
Target audience: liquids, gases; And steam
Power supply voltage: 12-36V DC, standard value 24VDC;
Output signal: 4-20mADC; (Special for four wire 220V AC power supply 0-10mA DC output)
Environmental temperature: -25~70 ℃ (for general transmitters), -15~70 ℃ (with on-site indicators)
Measurement temperature: -40-104 ℃, flange filled with silicone oil -40-104 ℃, filled with high-temperature silicone oil 15-315 ℃
Storage temperature: -40-100 ℃;
Relative temperature: 0-100% RH
Protection level: d Ⅱ BT4 ia Ⅱ CT5;
Power supply impact: less than ± 0.005%/V of the output range;
Vibration effect: Vibration at 200Hz in any direction causes an error of 0.05%/g of the maximum range (micro differential pressure of 0.25%/g);
Installation position impact: When the working diaphragm is not installed vertically, a zero position error of no more than 0.24Pa may occur, which can be eliminated by adjusting the zero position and has no effect on the range;
Stability: not exceeding the accuracy of the transmitter within six months;
Indicator: The on-site output indicator has an ammeter with a linear indication of 0-100%; 3-1/2 digit LCD display range and zero position: externally continuously adjustable;
Positive and negative migration: Differential pressure transmitter: maximum positive migration is 500%, maximum negative migration is 600%
Material isolation membrane: 316L stainless steel, Hastelloy-C, Monel alloy, tantalum
Exhaust/drain valve: 316L stainless steel, Hastelloy-C, Monel alloy
Flanges and fittings: 316L stainless steel, Hastelloy-C, Monel alloy
O-ring: Fluororubber
Filling fluid: silicone oil inert oil
Bolt: 316L stainless steel
Electronic casing: low copper aluminum alloy
HQ-1151/3351HP High Static Pressure Differential Pressure Transmitter Product Selection
HQ-1151/3351HP High Static Pressure Differential Pressure Transmitter Product Selection
|
1151/3351HP high static pressure differential pressure transmitter
|
describe
|
||||||||
|
Range of measurement
|
2
|
|
0~0.125-1.5KPa
|
||||||
|
3
|
|
0~1.3-7.5KPa
|
|||||||
|
4
|
|
0~6.2-37.4 KPa
|
|||||||
|
5
|
|
0~31.1-186.8 KPa
|
|||||||
|
6
|
|
0~117-690 KPa
|
|||||||
|
7
|
|
0~345-2068 KPa
|
|||||||
|
8
|
|
0~1170-6890 KPa
|
|||||||
|
9
|
|
0~3450-20680 KPa
|
|||||||
|
0
|
|
0~6890-41370 KPa
|
|||||||
|
output
|
E
|
|
4-20mADC
|
||||||
|
F
|
|
Intelligent Hart protocol
|
|||||||
|
J
|
|
4-20mADC is the square root of input pressure
|
|||||||
|
Material of liquid receiving parts
|
|
|
Flange joint
|
Exhaust/exhaust valve
|
Isolation Diaphragm
|
Fill with liquid
|
|||
|
22
|
|
316 stainless steel
|
316 stainless steel
|
316 stainless steel
|
silicone oil
|
||||
|
23
|
|
316 stainless steel
|
316 stainless steel
|
Hastelloy C
|
silicone oil
|
||||
|
24
|
|
316 stainless steel
|
316 stainless steel
|
Monel
|
silicone oil
|
||||
|
25
|
|
316 stainless steel
|
316 stainless steel
|
tantalum
|
silicone oil
|
||||
|
33
|
|
Hastelloy C
|
Hastelloy C
|
Hastelloy C
|
silicone oil
|
||||
|
35
|
|
Hastelloy C
|
Hastelloy C
|
tantalum
|
silicone oil
|
||||
|
44
|
|
Monel
|
Monel
|
Monel
|
silicone oil
|
||||
|
additional function
|
M1
|
0-100% linear indicator table
|
|||||||
|
M2
|
0-100% Square Root Indicator
|
||||||||
|
M3
|
31/2 LCD digital display
|
||||||||
|
|
Without header
|
||||||||
|
B1
|
Pipe bending installation plate
|
||||||||
|
B2
|
Plate bending installation plate
|
||||||||
|
B3
|
Pipe installation safety installation board
|
||||||||
|
|
Without installation board
|
||||||||
|
D1
|
The discharge valve is located at the upper part of the pressure chamber
|
||||||||
|
D2
|
The drain valve is located at the lower part of the pressure chamber
|
||||||||
|
C1
|
1/2-14NPT pressure joint rear welded with a Ø 14 pressure pipe
|
||||||||
|
C2
|
M20 × 1.5 T-shaped male threaded connector
|
||||||||
|
C3
|
M20 × 1.5 T-shaped male threaded connection block with additional T-shaped joint
|
||||||||
|
C4
|
1/2-14NPT taper pipe female thread connector
|
||||||||
|
d
|
Explosion proof Exd Ⅱ BT4
|
||||||||
|
i
|
Intrinsic safety type ia Ⅱ CT6
|
||||||||
|
|
|
Static pressure 1MPa
|
|||||||
|
|
Static pressure 4MPa
|
||||||||
|
H1
|
Static pressure 10MPa
|
||||||||
|
H2
|
Static pressure 14MPa
|
||||||||
|
H3
|
Static pressure 25MPa
|
||||||||
|
H4
|
Static pressure 32MPa
|
||||||||
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-