1200 º C seven temperature zone independent control tube furnace OTF-1200X-VII

video

Parameters

·Maximum working temperature: 1200 ℃< 1 Hour)

·Continuous operating temperature: 1100 ℃

·Suggested heating rate: ≤ ten℃/min

·Working voltage: AC 208-240V single-phase, 50/60Hz

·Maximum power: 8KW (requires 50A air switch)

·Heating element: molybdenum doped iron chromium aluminum alloy

·Heating zone: Seven independent heating zones can be controlled separately, with a total heating zone length of:1170mm,

Note: Due to the influence of measurement methods and external environment, the measurement results may have deviations. This parameter is for reference only and should not be used as a technical indicator of the equipment. You need accurate constant temperature zone data to purchase the product. Please contact our sales personnel

Furnace structure

·The furnace body adopts a double-layer shell structure and is equipped with an air cooling system to ensure that the surface temperature of the shell is less than 60 degrees Celsius℃

·High purity alumina fiber is used as the furnace material, and the surface is coated with a high-temperature alumina coating (which can improve heating efficiency and extend the service life of the furnace)

·Open type furnace body design makes it more convenient to replace furnace tubes

temperature control

·Seven temperature control systems are individually controlled, all using PIDMethod adjustment, can be designed to set at 30Stage heating and cooling program

· Temperature control instrument operation video

·Equipped with break and overheat protection,All seven temperature zones use KType thermocouple

·Control power box size:

·Optional:You can choose temperature control software to import temperature control programs and temperature curves into your computer

Optional furnace tube

Vacuum flange

·The furnace tube is a high-purity quartz tube, with optional diameters of 1 '-5'And the minimum length is 1400mm (55 '),This is not included

·To maintain the cleanliness inside the tube, quartz tube blockage can be chosen

External dimensions

1450（L）* 420（W）* 380mm（H）

net weight

About 85Kg

Open the door and turn off the power

To ensure safe use, the electric furnace is designed with a power-off function when the door is opened

Warranty period

One year warranty, lifetime technical support.

Special reminder: Consumables such as heating elements, quartz tubes, sample crucibles, etc. are not included.

2.Damage caused by the use of corrosive and acidic gases is not covered by the warranty.

Click to view the after-sales service commitment letter.

Certificate

· All electrical components (>24V) have passed UL/MET/CSA/CE certification. If the customer incurs certification fees, our company guarantees that a single device will pass the German TUV certification or CAS certification.

Precautions for use

·The pressure inside the furnace tube cannot exceed 0.02MPa

·Due to the high internal pressure of the gas cylinder, a pressure reducing valve must be installed on the cylinder when introducing gas into the furnace tube. It is recommended to purchase a pressure reducing valve from our company, which has a range of 0.01MPa-0.1MPa and can be used more accurately and safely

·When the temperature of the furnace body is higher than 1000 ℃, the furnace tube cannot be in a vacuum state. The pressure inside the furnace tube should be equivalent to atmospheric pressure and maintained at atmospheric pressure

·The gas flow rate entering the furnace tube should be less than 200SCCM to avoid the impact of cold large airflow on the heated quartz tube

·The long-term use temperature of quartz tube is less than 1100 ℃

·For the experiment of sample heating, it is not recommended to close the exhaust valve and inlet valve at the flange end of the furnace tube. If it is necessary to close the gas valve to heat the sample, it is necessary to constantly pay attention to the reading on the pressure gauge. If the pressure reading is greater than 0.02 MPa, the vent valve must be opened immediately to prevent accidents (such as furnace tube rupture, flange flying out, etc.)

Disclaimers

The product introduction content on this website (including product pictures, product descriptions, technical parameters, etc.) is for reference only. Possible deviations between data and physical objects may be caused by delayed updates and unpredictable website bugs. If you have any objections to the parameters or would like to learn more about the product details, please contact our sales personnel. The information provided on this website does not constitute any offer or commitment. Kejing Company will periodically improve and modify any information on the website without prior notice. We apologize for any inconvenience caused