20T hydraulic edge cutting machine

Product Name: Die Casting Edge Cutting Machine, Hydraulic Stretching Machine, Rapid Hydraulic Press, Die Casting Edge Punching Machine, Taiwan Automotive Parts Pressure Assembly/Riveting, Aluminum Product Edge Punching Machine, Aluminum Magnesium Product Edge Cutting Machine;
Scope of application:
This series of hydraulic presses is used for cutting and shaping burrs on various aluminum and magnesium alloy die-casting products, as well as for cutting plastic products; It is also suitable for the forming of plastic materials such as sheet metal cutting, stretching, etc. It is an upgraded product of the TM106 ordinary type, using advanced sub master cylinder hydraulic circuits. Whether it is noise, speed, or power consumption, it is superior to ordinary hydraulic punching machines. It is a new generation of hydraulic punching machines with high efficiency, high speed, high output, and high environmental protection. This machine is widely used in the die-casting industry;
Product features:
1. This series of hydraulic machine tools uses liquid pressure of 2-20MPA as the power source, and is externally connected to three-phase AC380V 50HZ or three-phase AC220 60HZ AC power supply;
2. This series of equipment uses liquid as the medium to transmit energy, adopts advanced master and slave cylinder hydraulic circuits, has low oil temperature, and the idle stroke speed is above 150MM/s, with a working speed of less than 30 MM/s;
3. When the device is in standby mode and moves up and down smoothly, the noise level does not exceed 75 decibels;
4. Adopting a four column three plate structure, the vertical accuracy of the movable plate is controlled by four precision guide sleeves, and the parallel accuracy of any point on the lower and upper working surfaces reaches below 0.1mm;
5. The punch press is equipped with waste blowing assembly and a waste material chute is opened in the center of the lower worktable;
The cutting stop position of the punch press is generally controlled by a pressure switch and a position sensor;
7. It has an automatic counting function, with two control modes: manual and semi-automatic. The press fit upper mold can be manually stopped within any travel range. It is equipped with an emergency rebound button and can also be equipped with an infrared handguard device;
8. Customers can adjust the pressure, stroke, punching speed, blowing time, and closing height by themselves for convenient operation;
9. The hydraulic system has a built-in oil tank at the top, with a clean and stable appearance;
10. The output range of this series of hydraulic machinery includes 15tf, 20tf, 25tf 200 tf optional (1tf=1000kgf=9.8KN)