1600XHydraulic electric control valve overview

600XElectric control valve is a hydraulic operated valve with solenoid valve as the guide valve. Commonly used for automatic control in water supply, drainage, and industrial systems, the control response is accurate and fast, and the pipeline system can be remotely opened and closed based on electrical signals to achieve remote operation. And it can replace gate valves and butterfly valves for large-scale electric operating systems. The valve closing speed can be adjusted, and it closes smoothly without pressure fluctuations. This valve is small in size, light in weight, easy to maintain, convenient to use, and safe and reliable. Electromagnetic valves can be selected with AC power220V, or direct current24VThe normally open or normally closed type can be selected according to various occasions.

II600XStructural characteristics and applications of hydraulic electric control valves

600XThe hydraulic electric control valve consists of a main valve, an electromagnetic pilot valve, a needle valve, a ball valve, a micro filter, and a pressure gauge to form a hydraulic control connection system. Remote control of valve opening and closing can be achieved through electromagnetic pilot valves. After installing additional devices, the speed of opening and closing can be controlled.
This product uses a pilot valve to control the opening and closing of the valve, saving energy. Can replace other large electric devices for valves.
This series of valve products is widely used in water supply network systems such as high-rise buildings and living areas, as well as urban water supply projects.

III600XWorking principle of hydraulic electric control valve

When the valve supplies water from the inlet end, the water flows through the needle valve into the main valve control room. When the solenoid valve is opened, the water in the control room flows out through the solenoid valve and ball valve. The opening of the ball valve is greater than that of the needle valve, and the pressure in the control room of the main valve is very low. The main valve is in a fully open state. When the solenoid valve is closed, the water in the control room of the main valve cannot flow out. The control room increases the pressure and pushes the diaphragm to close the main valve.

4600XMain technical parameters of hydraulic electric control valve

5600XMain component materials of hydraulic electric control valve

VI600XInstallation diagram of hydraulic electric control valve

7600XMain dimensions of hydraulic electric control valve