Hyperbolic Blender Price/SQJB-500 Hyperbolic Blender

SQJB-500 DoubleRegular inspection and maintenance of curved mixer

Hyperbolic mixerAlso known as an aeration stirring device with multiple layers of impellers. It is applied in various water treatment processes such as municipal engineering, chemical papermaking, and others. Water mixing is one of the key processes, and traditional mixing machinery is divided into two commonly used methods: vertical axis folding blade and horizontal (submersible) blade. Due to the installation method and blade form determining its mixing form, it is not ideal in terms of energy consumption and mixing effect, which not only brings unnecessary increases to the operating costs of sewage treatment plants, but also directly affects the final process treatment effect.

The multi surface mixer is a device that combines mixing and aeration, and can also be used for single mixing. It has a reasonable design, low power consumption, and can be applied to large, medium, and small wastewater treatment. It has low investment, good treatment effect, long service life, and is made of PE or fiberglass, steel materials, etc., which enhances the anti-corrosion performance of the equipment.Multi surface mixerThe structure is simple, the management is convenient, the machining accuracy of the gearbox is high, and the heat treatment is good. However, there have also been cases of gear teeth being damaged and the gear shaft not leaving axial clearance. We have thoroughly cleaned the gearbox and carefully inspected all gears, gear shafts, and bearings.

The surface of the teeth of the multi surface mixer is smooth, without pitting or interlocking, the gear mesh clearance is normal, and there is no significant wear on the tooth profile; The radial and axial clearances of each bearing are normal, and there are no pitting or freckles on the inner and outer rings and roller surfaces. The overall quality is good; The axial clearance of each axis is fair, and the output shaft of the hand drive flows freely without any jamming or abnormal noise. Therefore, eliminate the fault of the gearbox. The mechanical seal department is the most prone to malfunction in multi surface mixers, often resulting in mechanical seal failure due to wear and tear, and water entering the sealing chamber. We first disassembled the mechanical seal assembly, which includes two setsMulti surface mixerThe mechanical seal, skeleton oil seal, output shaft, bearings, housing, and end caps were cleaned and inspected, and the relevant dimensions of the bearing seat and output shaft were checked. No problems were found, indicating that the mechanical seal department is intact and the possibility of a malfunction has been ruled out.

Working characteristics of hyperbolic FRP impeller:
twoCurved submersible mixerAs an efficient mixing and stirring device, it is suitable for mixing and stirring various low viscosity liquids, solid-liquid, and gas-liquid mixtures; Not only suitable for circular and square pools, but also commonly used in rectangular pools for unit arrangement.
Among the various existing sewage treatment processes in China, the impeller mixer can mainly overcome the traditional blade typeThe (slurry) mixing method is prone to blind spots and poor mixing effect of water and gas in the aeration process. Give full play to its advantage of uniform mixing. The main characteristics are manifested in the following aspects:
⑴ It can be used in various situations where liquids, solids, and gases are mixed, and can replace existing stirring equipment to achieve three-dimensional, spiral mixing, making stirring more uniform and improving stirring efficiency.
⑵ Larger specific surface area with smaller blade ratio, larger circulating water flow, lower energy consumption, and energy savings of 30% -50% compared to traditional mixing methods.
The whole machine has a compact structure, reliable operation, and easy installation and maintenance.
The impeller is made of reinforced fibers or steel materials, which can adapt to different working conditions and have a long service life.

Performance parameters:

Hyperbolic mixer suitable for conventional municipal sewage conditions

Wholesale selection and application of hyperbolic fiberglass impellers:
The selection of the SQJB-500 series curved mixer is completely the same, with the only difference being the installation method. Similar to the selection of other types of mixers, the selection of curved mixers is related to parameters such as the pool type, volume, liquid depth, medium concentration, temperature, and pH of the equipment.
The selection of surface mixers is mainly based on the effective service area of each device, and according to the principle that the ratio of pool length to pool width does not exceed twice, the rectangular pool can be divided into several equal working units to determine the number of mixers.
For water depths exceedingIf the concentration exceeds the specified range of 5 meters, consideration should be given to increasing the power or increasing the working speed of the mixer when selecting, to ensure that the mixing effect is achieved in large capacity and high concentration media.
Under normal operating conditions, it is recommended to prioritize dry installation. For those with noise or visual requirements, it is recommended to use submersible installation. Our company can assist users in selecting shapes in special environments.