The ICP-CC488E-CN anti-theft alarm controller is a more powerful Solution E series host unit launched according to the demand of the Chinese market. It provides 16 programmable defense zones, supports 32 programmable user codes and 32 wireless remote user codes, and offers users more convenience with RADIO wireless remote control, RSC remote control, and telephone remote deployment and removal functions.
Basic functions:
32 programmable user codes and 32 wireless user codes allow users to program up to 32 user codes and 32 wireless user codes. Only users with a master code can add or change other system user codes/wireless user codes, including the master code. Up to 32 RADIO remote keys can be added through the RADIO wireless receiver. If using the WE800E wireless receiver, up to 21 RE012EU remote keys can be added. Two partition alarm hosts can be used for two partitions. Users can operate these two partitions from one main keyboard or multiple sub keyboards. Supports 16 defense zones with 8 onboard terminals, and supports dual resistor expansion to 16 defense zones. Support RSC remote security monitoring. Users can remotely operate the security system on their smartphones or tablets by downloading the Bosch RSC APP, enabling/disabling remote deployment/disarming, enabling/disabling output, viewing effective alarms and fault status, and real-time control of the security system dynamics. Support RADIO wireless remote control by setting the wireless receiver to a RADIO receiver, adding the device ID of the RADIO series RFKF-TB-CHI double key wireless remote control key or RFKF-FB-CHI four key wireless remote control key, and configuring it to use the RADIO wireless remote control function.
Event email reminder:
This feature allows users to receive real-time event reports via email. Email reminders must be implemented by connecting to the B426-CN network module or B450+B442GPRS module, and separate sending and receiving email accounts need to be set up. The system can connect to two network/GPRS modules and support sending messages to multiple designated receiving email addresses. Supports text, icon, and touchscreen keyboards, with four keyboards supported within the same system. Supports multiple communication formats and paths, including PSTN, GPRS, and IP, and can adapt to various transmission environments. Supports multiple communication paths, can simultaneously connect 2 network modules, or 2 GPRS modules, or 1 network module and 1 GPRS module, providing users with more choices.
Support remote deployment/disarming via phone, you can remotely deploy the system from any location via phone. For security reasons, it is not allowed to use this method to disarm the system. This feature requires the installation personnel to perform the corresponding settings before it can work.
Isolation zone:
By using the zone isolation function, one or more zones can be manually disabled before the system is deployed. After being isolated in a certain defense zone, you can enter the zone in the armed state without triggering an alarm. Personal phone alarm dialing: With the personal phone alarm dialing function, you can call your mobile phone or relatives/friends when the system triggers an alarm. This feature requires installation personnel to perform relevant system programming in order to send reports in personal phone alarm format. The main code holder can change their phone number at any time. Fault inquiry and analysis: If the system malfunctions, the fault or power indicator will flash and the keyboard will beep once per minute. If the AC main power supply is interrupted, the power indicator will flash until the AC main power supply returns to normal. To determine the type of system failure that occurred, you can enter the fault analysis mode for troubleshooting.