INCOMETER engine cylinder block tester from Germany
Advantages brought to users:
Highly flexible and adaptable, it is an ideal measurement system for both research and testing phases
Not sensitive to vibration, it is an ideal measuring instrument for production sites
Due to the use of an interchangeable clamping mechanism, it is suitable for measuring cylinder bodies of different sizes and has simple adaptation
• Equipped with self calibration function, saving tedious positioning work
When the probe used for relative measurement of the cylinder shaft is eccentric or tilted, it can be automatically compensated by software
• It is a measuring instrument with short measurement time on the market

Software features:
Measurement and analysis of cylinder deformation
◆ Input and output of data, tables, and graphics
Fourier data, graphic development analysis
Wear measurement analysis
◆ Axial scanning analysis
◆ Error correction
◆ Compatible with QS-START rapid state analysis software, V-type cylinder hole detector
V-shaped cylinder hole detectorTechnical parameters:
Measure shaft length 80 115 150 200mm
Diameter range * 65-155mm
Measurement time is 8 seconds per side
Sample 14400 points per section
Measurement range ± 400 μ m
Resolution 0.1 μ m
Accuracy roundness ≤ 1.0 μ m
Contour ≤ 1.5 μ m
Parallel ≤ 1.5 μ m

P-type cylinder hole detector
Technical parameters:
Diameter range 60-150mm
Depth measurement 300mm
Resolution 0.1 μ m
Seven cross-sections can be measured, with 14400 points on each side
Accuracy roundness ≤± 1.0 μ m
Contour ≤± 1.5 μ m
Diameter ≤± 1.0 μ m
Speed measurement: less than 15 seconds per hole

Application example: