VIP member
Input liquid level sensor-2300 type
Introduction: The 2300 type liquid level sensor is composed of a silicon pressure resistance diaphragm filled oil core as a signal measuring element s
Product details
Product description
The 2300 type liquid level sensor is composed of a silicon pressure resistance diaphragm filled oil core as a signal measuring element sealed in a stainless steel shell. It is specially designed for sealing connection between cables and shells. There is a gas conduit inside the cable, which allows the sensor to be pressurized and communicate with the atmosphere, ensuring measurement accuracy. It can be used in liquids compatible with the transmitter structure material for a long time.
Product Features
Remove the stainless steel sealing structure and implement measurement methods
Constant current source power supply, voltage signal output
Cable connection is water-resistant, creamy, and wear-resistant
Product Application
Non corrosive gas and liquid pressure measurement for 316L stainless steel.
Widely used in urban water supply and drainage, sewage treatment, water conservancy and hydrological measurement and monitoring, river channels, marine fields, etc
performance parameters
|
Range:
|
0~1...~200m
|
|
Allow overload:
|
Less than 1.5 times the rated range
|
|
accuracy:
|
±0.1%(最小) ±0.25%(典型) ±0.5%(最大)
|
|
Power supply current:
|
Constant current: 1.5ADC Constant voltage: 9VDC
|
|
Zero position output:
|
< ± 2mVDC
|
|
Full range output:
|
≥70mVDC
|
|
accuracy:
|
±0.1%(最小) ±0.25%(典型) ±0.5%(最大)
|
|
Long term stability:
|
± 0.3% F.S/year
|
|
Compensation temperature:
|
0℃~70℃
|
|
Working temperature:
|
-10℃~80℃
|
|
Storage temperature:
|
-40℃~120℃
|
|
Zero temperature coefficient:
|
≤ ±0.02%F.S/℃
|
|
Full temperature coefficient:
|
≤ ±0.02%F.S/℃
|
|
Shell material:
|
Stainless steel 304, polytetrafluoroethylene
|
|
Membrane material:
|
316L， anticorrosion
|
|
O-ring seal:
|
fluororubber
|
|
Cable:
|
polyethylene
|
Exterior structure (unit: mm)
Selection code
| 2300 - | 1 | - | 2 | - | 3 | - | 4 | - | 5 | - | 6 | ||||||||
| 1 | Principles and Applications | ||||||||||||||||||
| 1 | Diffuse silicon universal type | ||||||||||||||||||
| 2 | Ceramic capacitive type | ||||||||||||||||||
| 3 | Polytetrafluoroethylene anti-corrosion type (PTFE) | ||||||||||||||||||
| 2 | Exterior structure | ||||||||||||||||||
| E | Direct output, cable type | ||||||||||||||||||
| 3 | measurement range | ||||||||||||||||||
| range | 0~1m…~200m | ||||||||||||||||||
| （0-x）m | X: Indicate the actual measurement range | ||||||||||||||||||
| 4 | power supply | ||||||||||||||||||
| D1 | 24VDC | ||||||||||||||||||
| D2 | Other power supply methods | ||||||||||||||||||
| 5 | output signal | ||||||||||||||||||
| S1 | 4~20mADC | ||||||||||||||||||
| S2 | 1~5VDC | ||||||||||||||||||
| 6 | Leave cable length | ||||||||||||||||||
| L | Indicate actual length | ||||||||||||||||||
| OEM customization | |||||||||||||||||||
| / | Regular shipment without customized content | ||||||||||||||||||
| A | Nameless light plate customized product | ||||||||||||||||||
| B | Designated nameplate, designated trademark product | ||||||||||||||||||
Selection Tips
When selecting, please pay attention to the compatibility between the measured medium and the contact part of the product, and also indicate the density of the medium (excluding water) in the measurement state.
2. There are two types of cable materials to choose from: ordinary cables and anti-corrosion cables.
When the product is used in areas with frequent thunderstorms, it is recommended that users install lightning protection devices and ensure that the product and power supply are reliably grounded.
4. Special requirements, please discuss with our company and indicate them in the order.
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-