Insertion and extraction force tester

Resolve fixture issues for various connector testing, and ensure automatic alignment of male and female connectors during testing without the problem of one-sided feeding.

Combined with a dynamic impedance testing system, it is possible to test the dynamic impedance and draw a "load stroke impedance curve" while testing the insertion and extraction force.

This machine is suitable for testing the insertion and extraction force of various connectors. It provides various connector specific clamping fixtures and automatic centering devices with patented designs, which can obtain completely accurate insertion and extraction force tests.

Windows Chinese Windows version software screen settings.

And all data can be stored (such as test conditions, insertion and extraction stroke curves, life curves, inspection reports, etc.).

Test project:

1. Single hole plug and unplug test for connectors. Durability test for connector insertion and extraction.

2. Normal Force test for connectors.

3. Single PIN and plastic retention test for connectors. (Retention Force)

4. Plug and unplug test for the entire row of connectors.

5. Various compression and tensile strength tests.

6. Can be connected to the contact impedance machine simultaneously. (Optional) (Dynamic Impedance Testing System)

Software features:

1. The testing conditions are set by the computer screen and can be stored. Settings can be selected from the drop-down menu or data can be entered directly. (including test category, measured direction of motion, load measurement range, stroke measurement range, stroke origin position, stroke origin detection, measurement speed, total number of measurements, pause time, waiting position per time, and number of air compressions).

2. Can store and print graphics (load stroke curve, load attenuation life curve, inspection report).

3. The overload protection function of the load element can ensure that the load element is not damaged. Simultaneously display the load stroke curve graph and the life curve graph.

4. Automatic zero point detection of load, and the load value detected at the origin can be set.

5. The load unit displays N, lb, gf, and kgf, which can be freely switched.

6. Can be paired with multiple load elements simultaneously. (2kgf, 5kgf, 20kgf, 50kgf, 200kgf, 500kgf) (optional)

7. The machine adopts a high rigidity structure design combined with servo motors, which can ensure accuracy after long-term use and is suitable for general tension, compression testing, and insertion and extraction durability testing.

8. Stop exceeding the specification value (during durability testing, if the test data exceeds the set upper and lower limit specification values, the machine will automatically stop).

9. Measurement items: larger load value, peak value, valley value, stroke load value, stroke load value, insertion point resistance value (optional), load or stroke resistance value.