VIP member
Israeli made laboratory titanium alloy heating plate heating plate
HP-2820 continuous 600C high temperature resistant laboratory titanium alloy heating plate made in Israel. The heating plate is equipped with PID cont
Product details
HP-2820 continuous high temperature resistant laboratory titanium alloy heating plate with a temperature of 600 ° C, produced in Israel. The heating plate is an OEM imported product with a titanium alloy tabletop, equipped with PID control that can be programmed. The temperature can rise to 600 degrees in 20 minutes. The upper panel is made of titanium alloy, with an outer size of 280x200mm and a constant temperature area of 230x160mm. The metal plate grid design has an insulation layer inside the metal plate to reduce temperature loss, and the insulation cover ensures heat loss and shortens heating time. In a closed lid (with heat-resistant glass on the inner surface and a distance of 26 millimeters from the heating plate), a high-precision heating table is used. The entire shell is made of stainless steel. The temperature regulator is connected by two cables. The HP-2820 can be separately connected to a temperature controller or programmer, and the temperature controller can control a set temperature according to your requirements. The programmer can determine when to heat up, when to maintain a constant temperature, and when to cool down
HP-2820 continuous resistance to 600 ° CIsraeli made laboratory titanium alloy heating plate heating plateHeating plateInstrument features:
|
HP-2820 typeTemperature controller TR 28-3T This temperature controller is suitable for high-temperature heating plates. By adjusting the temperature setting value through the membrane keyboard, the PID controller maintains a constant temperature (with a control deviation of 2 K or less). | |||||
|
HP-2820 typeProgrammer PR 5-3T This programmer can control a comprehensive time/temperature regulation high-temperature hot plate. Pressing the START key can activate 5 gradient programs. The maximum 5 gradients can be programmed (including gradient time, constant temperature and constant temperature time), and 3 programs can be input and loaded into non-volatile memory. A programming time allows for starting 99 hours in advance. Each temperature and time parameter selection key. Therefore, the setting is simple and clear. The display parameter can be set to "0" through a single gradient setting. each group Values can control a program. EEPROM can be removed. The equipment is equipped with continuous control switches and buzzer signal programs. | |||||
|
HP-2820 typePR5-3T and TR 28-3T equipment 2-Link switch; Independently adjust the proportional range, derivative and integral factors, and cycle time; Control range limitations (to avoid setting values that do not meet requirements or having harmful applications); Power input, actual value correction, connection to high-temperature hot plate, power control range 1? 00%, uninterrupted switching. The dual regulator continuously displays the actual value. In addition, the program displays the remaining time gradient. When the SET setting button is pressed, the display changes the positioning point. The equipment has a thermal protector to prevent overheating. HP-2820 typeperformance parameter |
| model | HP-2820 | HP-2820C |
| Dimensions of titanium alloy plate surface | 280 mm x 200 mm |
|
| Constant temperature zone | 230 mm x 160 mm |
|
| Zui Multi Temperature | 600°C |
|
| voltage | 230 Volt / 50..60 Hz |
|
| power | 2000 Watt |
|
| temperature | ±2K |
|
| Cable Length | 1.5m |
|
| Instrument dimensions | 350 mm x 300 mm |
|
| height | 110 mm |
145 mm |
| Range of sample height requirements | - | 26 mm* |
| weight | 8 kg |
10kg |
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-