JFD-A type electrical fire monitoring equipment-Fornitore globale

7th Floor, Building 1, Aosheng Building, No. 1166 Xinluo Street, High tech Zone, Jinan City, Shandong Province

FUNCTIONAL OVERVIEW

The JFD-A type electrical fire monitoring equipment is wall mounted and is usually prioritized for installation in the fire control room. By collecting and monitoring residual current, over line current, and temperature signals, early prevention and alarm of electrical fires can be achieved. When necessary, the detected distribution circuit can also be linked and disconnected. According to user needs, it can also meet the requirements of fire alarm system linkage, data exchange, and sharing.

Technical Parameter

Detection object	Remaining current, temperature
working voltage	AC220V±15%/50HZ
power consumption	≤25W(Excluding external devices)
Communication method	MBUS bus communication
Optional specifications	64.200.400.600.800.1000
Alarm method	audible and visual alarm
ALARM IN	Built in four sets of programmable external control outputs, with contact capacity of 5A/DC24V or 5A/AC220V
Spare battery	DC12V/7Ah lead-acid battery
Display mode	TFT graphical Chinese LCD display
Distance	≤1000MM（ZR-RVS×1.5MM²）
communication interface	1 RS485 bus. 1 RS232 interface (for printer).
Installation method	Wall Mount
operation temperature	—10℃--＋55℃
relative humidity	10% -93% RH (non condensing)
External dimensions	335mm * 110mm * 435mm (length * width * height)
Adaptive detector	JFDTB、JFDTD

Advantage value

Support node monitoring within 1000, suitable for monitoring large and medium-sized engineering projects;
7-inch true color LCD display, user-friendly operation, easy and convenient to use;
Two bus polarity free design with short-circuit protection function;
Built in large capacity data storage, capable of classifying and storing 20000 pieces of alarm, fault, and other information;
Equipped with three sets of programmable outputs, it can achieve manual and automatic control output;

The circuit is equipped with isolation function, and the operation does not interfere with each other.

Detail drawing

External structural diagram

Panel display diagram

Product installation diagram

Wiring diagram

Model Selection Table

Equipment name	Equipment model	specifications	describe
Electrical fire monitoring equipment	JFD-A	64 point position	Note: The monitoring points are data points, which are the total number of residual current transformers, temperature sensors, and overhead current transformers.
		200 points
		400 points
		600 points
		800 points
		1000 points