VIP member
Japan IMV wireless vibration analysis VM989
Wireless Vibration Analysis Bearing Diagnostic Instrument Technical Parameters: The vibration analysis bearing diagnostic instrument produced by Japan
Product details
Technical parameters of wireless vibration analysis bearing diagnostic instrumentVM989
Function:
Specification and technical requirements
Wireless communication method：
Infrastructure mode
4Mbit×16bank
2 rechargeable batteries of size 7
Loss of current：
In the measurement state (when using WiFi): approximately 150mA
Temperature range for use：
+5 ° C to+50 ° C (only with attached battery)
VM989Product Features:
VM-989Vibration analysis bearing diagnostic instrumentEquipped with three built-in diagnostic criteria, it can immediately answer on-site personnel's concerns about the working status and vibration exceedance of rolling bearings, and analyze the severity of faults.
The host is a popular multifunctional tablet computer with functions such as address book, calculator, schedule, email, notepad, work list, etc. It can be used independently and carried around. There are various parameters for describing vibration, and a typical vibration measuring instrument requires multiple parameter switches to complete multi parameter measurements. If there is data management software, it can transfer data to a computer for efficient data management.
After sales service hotline:
Brand official website:http://www.hofusen.com
Service commitment:
Hongfuxin Precision Technology (Beijing) Co., LtdLimited companies provide not only products but also services to users.HongfuxinWe value reputation, technology, and service. We deeply understand that customers are the foundation of a company's survival, and service is the source of its development. We have always provided one-stop pre-sales, in sales, and after-sales services based on the characteristics and actual requirements of our customers, including recommended solutions, process design, equipment configuration, equipment installation and adjustment, personnel training, long-term maintenance, and upgrades. If you have measurement difficulties but have not yet used our products or have purchased our products, but still have opinions or suggestions about our services, please download the following pre-sales customer survey and after-sales customer feedback form, fill them out and return them to us. We will provide you with reasonable solutions and adopt your valuable opinions and suggestions, and provide you with high-quality products and services! Thank you for your support and welcome to enjoy our services!
Technical parameters of wireless vibration analysis bearing diagnostic instrument The vibration analysis bearing diagnostic instrument produced by Japan's IMV company can simultaneously measure multiple vibration data: acceleration value, velocity value, displacement value, envelope value, and high-frequency value. When abnormalities are found in the machine,This instrument can also perform time-domain waveform analysis, FFT frequency analysis, envelope analysis, and identify the cause or location of faults.
name:
Alias:
Wireless vibration meter, wireless vibration analysis, wireless detection device, wireless monitoring device
Interface：
Wireless Network (LAN): IEEE802.11b/g, compatible with WiFi 128 bit WEPWPA and WPA2
Cable Universal Serial Bus Architecture (USB): USB 2.0
Visual COM ports and direct connections
Equipped with memory capacity：
Power Supply：
Temperature range for use：
30-90%, to avoid condensation
sampling frequency：
Great 76.8kHz
AD resolution：
16bit
The operating system for tablet computers：
Android3.2, Android4.1，Android4.2，Android4.3
weight：
Approximately 145G
size：
42mm(D)×40mm(W)×89mm(H)
sensor：
Piezoelectric accelerometer
Acceleration frequency range：
10～10kHz
Speed frequency range：
10～1kHz
Displacement frequency range：
10～150Hz
Large measurement acceleration：
500m/s2
country of origin:
Japan
Important measurement results of users can be transmitted to a general-purpose computer, equipped with powerful Chinese management and analysis software：
(1) Establish archives
(2) Data communication
(3) Time domain analysis
(4) Spectrum analysis
(5) Trend analysis
(6) Printing machine and measurement point reports
(7) Status judgmentSimultaneously perform various measurement supports and ensure fast and easy measurements
This vibration instrument can simultaneously measure the acceleration, velocity, displacement, and acceleration envelope value used for diagnosing bearing status by pressing the "start button" once, thereby reducing the workload and preventing missed measurements.
Functional interface
Functional interface
Spectrum (FFT) analysis function
After measuring the vibration, ifVibrationWhen the value is too high, spectrum analysis can be used. Please experience the high-resolution effect of the pocket sized 12800Line. You will be unable to put it down
Data saving
This is an important basic function of this type of instrument.
All collected data can be saved. When using an extended SD card, more data can be stored.
Waveform measurement function
Clearly grasp the changes in vibration at a glance
The vibration waveform has its unique characteristics, so it can be recognized at a glance. Can record waveforms for up to 30 minutes.
Continuous monitoring function with real-time display
Real time monitoring of waveform data and frequency spectrum (FFT)
Attached judgment value
Time domain waveform analysis function
Wireless vibration measurement with low power consumption, using two 7th batteries. Universal USB power interface for charging.
Wireless vibration measurement is lightweight and compact, please put it in your pocket
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-