VIP member
Jinjiale electric humidifier
1. Stable performance 2, long service life 3, safe circuit design 4, minimal maintenance workload
Product details
Jin JialeElectric humidifierworking principle:
Electric humidifier is based on the principle of resistance heating. The electric heating tube is immersed in water. After the electric heating tube is powered on, according to Joule's law, the electric heating tube generates heat, which turns water into steam. When in use, connect the power, water source, and drainage pipe, and the humidifier will start to receive water. When the water level in the box reaches the working water level, the electric heating tube will start heating up; When the water level is lower than the working water level, the control circuit can be cut off, thereby stopping the heating of the electric heating tube; When the water level is too high, it overflows from the overflow outlet. The steam generated during the work process is discharged through the exhaust hole. Electric humidification is achieved by controlling the heating power of the heating element to regulate the amount of steam output.
Model designation instructions for electric humidifiers:
Type A can accept 0N/0FF signals or building automatic control signals. The electrical control box has an automatic control interface and switch quantity adjustment,
B-type can accept humidification signals such as 0-5V, 0-1Ov, 4-20mA, etc., with 0-100% linear power output proportional adjustment control,
The C-type steam outlet is an open type,
The J-type steam outlet is connected to a pipeline with a steam distribution pipe,
The K-type steam outlet is connected to a pipeline with a fast steam distributor.
Technical Performance Specification Table for Electric Humidifiers（For mobile access, please click here）：
Features of Jinjiale electric humidifier:
Reasonable structure: Unique design, stable performance, safe and reliable, made of stainless steel material, beautiful and lightweight, easy to install and use.
High thermal efficiency: The heating tubes are arranged reasonably and generate heat evenly; It can quickly heat and generate steam to meet the needs.
Safe and reliable: The stainless steel low-level protection device can cut off the control circuit when the water level is too low, avoiding accidents caused by dry burning of the heating tube.
Excellent performance: High quality electric heating tubes make the electrical performance of the product far superior to national standards, resulting in excellent product performance and a long service life.
Electric humidifier control system:
Our company has designed and developed various control methods to meet different user needs:
A-type control mode: ON/OFF means the humidifier receives 0N/0FF control signals.
B-type control mode: proportional adjustment, that is, the humidifier receives adjustment signals such as 0-5V, 0-10V, 4-20mA, etc. to continuously adjust the humidification amount of the humidifier. B-type standard configuration includes Siemens LCD controller RWD68 and Siemens temperature and humidity sensor.
Usage conditions of electric humidifier:
Environmental temperature and humidity: The temperature around the electric humidifier control box is 0-40 ℃, and the humidity is less than 80% RH
Inlet water quality: various water qualities such as clean tap water, softened water, deionized water, etc. It is best to use pure water (R0 water)
Water hardness:<30 German degrees
Inlet pressure: 0.1-0.3MPa
Insulation strength: 2KV
Insulation resistance: greater than 5M Ω
Air duct pressure: less than or equal to 100mmH20 (limited to JDR-J series)
Dimensions of the main unit of the electric humidifier:
1. Schematic diagram and external dimensions of C-type open host
(For mobile access, please click here)
2. Schematic diagram and external dimensions of J-type takeover host
（For mobile access, please click here）
3. Indoor steam distributor
4. External dimensions of electric humidifier B-type proportional control box
5. Indoor steam distributor
Indoor steam distributor function: Directly spray the steam generated by the electric humidifier indoors, and the steam is evenly absorbed by the indoor air.
6. Quick absorption steam distribution diagram, quick absorption steam distributor function
Product accessories:
C Open Installation Diagram
Attention: When installing the C-type electric humidifier, the humidifier host is installed in the air conditioning box, while the electrical control box is installed outside the air conditioning box
Schematic diagram of J-shaped takeover installation
Attention: When installing the J-type electric humidifier, both the humidifier host and the electrical control box are installed outside the air conditioning box, and the steam distribution pipe is inserted or installed into the humidification section of the air conditioning box.
The installation position of steam distribution pipe in the air duct
1. The installation in the horizontal air duct and the humidification section of the horizontal air conditioning unit is shown in the following figure:
2. The installation in the vertical air duct and vertical air conditioning unit humidification section is shown in the following figure:
Configuration instructions for electric humidifier:
Body: Stainless steel N304S.S. main heating water tank with N sets of long-life electric heating tubes inside; Stainless steel float ball controls the inlet of the water tank, with a specially designed float ball valve inside; The low water level control box contains a travel protection switch to prevent dry burning without water;
Junction box; Composition of electrical control box, etc;
The electrical control box for the humidifier with ON/OFF switch quantity control includes: manual/automatic transfer switch, air switch, indicator light, relay, contactor, terminal block, etc., which can receive ON/OFF signals for operation;
The electrical control box for the proportional control humidifier includes: manual/automatic transfer switch, air switch, contactor, indicator light, relay, leakage protection, overload protection, terminal block, high-quality fan cooling SSR power output device, etc;
The voltage regulation module adopts a microcontroller design for protection, combined with IGBT as a power control device, powered by a DC power supply. The module is equipped with negative voltage feedback and has overcurrent, overheating, and short circuit functions. Linear proportional power output, control signal input: 0-5V or 4-20mA, LED LCD display Siemens controller, temperature and humidity sensor, etc.
Additional options:
Thermal insulation
Steam rapid distributor
Preheating function
Installation precautions:
1. Working voltage: not exceeding 1.1 times the rated value, and the casing should be effectively grounded.
2. Working medium: tap water or pure water that is not prone to scaling, corrosion, or impurities.
When installing the humidifier, it should be kept level and not tilted. When connecting the external water pipe, attention should be paid to the direction of the inlet valve not rotating.
During the work process, the exhaust hole should not be covered to avoid affecting the discharge of steam.
5. Do not adjust or remove the float valve and control switch at will to avoid damage.
6. The top rod of the travel switch in the control box should be checked regularly for debris or rust, and the top rod should be ensured to slide freely.
7. Regularly inspect and clean the surface of the electric heating tube and the scale inside the box, while ensuring that the connecting pipes between the water tank and the control box are unobstructed. When cleaning, simply open the cover plate of the box.
8. The power must be turned off during inspection and cleaning.
When not in use for a long time, the power and water sources should be turned off, and any remaining water in the box should be drained.
Electric humidifier is based on the principle of resistance heating. The electric heating tube is immersed in water. After the electric heating tube is powered on, according to Joule's law, the electric heating tube generates heat, which turns water into steam. When in use, connect the power, water source, and drainage pipe, and the humidifier will start to receive water. When the water level in the box reaches the working water level, the electric heating tube will start heating up; When the water level is lower than the working water level, the control circuit can be cut off, thereby stopping the heating of the electric heating tube; When the water level is too high, it overflows from the overflow outlet. The steam generated during the work process is discharged through the exhaust hole. Electric humidification is achieved by controlling the heating power of the heating element to regulate the amount of steam output.
Model designation instructions for electric humidifiers:
Type A can accept 0N/0FF signals or building automatic control signals. The electrical control box has an automatic control interface and switch quantity adjustment,
B-type can accept humidification signals such as 0-5V, 0-1Ov, 4-20mA, etc., with 0-100% linear power output proportional adjustment control,
The C-type steam outlet is an open type,
The J-type steam outlet is connected to a pipeline with a steam distribution pipe,
The K-type steam outlet is connected to a pipeline with a fast steam distributor.
Technical Performance Specification Table for Electric Humidifiers（For mobile access, please click here）：
| Model JDR |
A(B)-3-C(J) |
A(B)-5-C(J) |
A(B)-9-C(J) |
A(B)-16-C(J) |
A(B)-20-C(J) |
A(B)-30-C(J) |
A(B)-40-C(J) |
A(B)-60-C(J) |
A(B)-80-C(J) |
A(B)-120-C(J) |
|
Humidification rate (Kg/h) |
3 |
5 |
9 |
16 |
20 |
30 |
40 |
60 |
80 |
120 |
|
Current (A) |
11.4 |
13.6 |
11.4 |
18.2 |
25 |
32.7 |
46.4 |
65.4 |
92.7 |
139 |
|
Power (kw) |
2.5 |
3 |
7.5 |
12 |
16.5 |
22.8 |
30.6 |
45.6 |
61.2 |
96 |
|
Voltage type |
220V ／ 50Hz |
380V ／ 50Hz |
||||||||
Features of Jinjiale electric humidifier:
Reasonable structure: Unique design, stable performance, safe and reliable, made of stainless steel material, beautiful and lightweight, easy to install and use.
High thermal efficiency: The heating tubes are arranged reasonably and generate heat evenly; It can quickly heat and generate steam to meet the needs.
Safe and reliable: The stainless steel low-level protection device can cut off the control circuit when the water level is too low, avoiding accidents caused by dry burning of the heating tube.
Excellent performance: High quality electric heating tubes make the electrical performance of the product far superior to national standards, resulting in excellent product performance and a long service life.
Electric humidifier control system:
Our company has designed and developed various control methods to meet different user needs:
A-type control mode: ON/OFF means the humidifier receives 0N/0FF control signals.
B-type control mode: proportional adjustment, that is, the humidifier receives adjustment signals such as 0-5V, 0-10V, 4-20mA, etc. to continuously adjust the humidification amount of the humidifier. B-type standard configuration includes Siemens LCD controller RWD68 and Siemens temperature and humidity sensor.
Usage conditions of electric humidifier:
Environmental temperature and humidity: The temperature around the electric humidifier control box is 0-40 ℃, and the humidity is less than 80% RH
Inlet water quality: various water qualities such as clean tap water, softened water, deionized water, etc. It is best to use pure water (R0 water)
Water hardness:<30 German degrees
Inlet pressure: 0.1-0.3MPa
Insulation strength: 2KV
Insulation resistance: greater than 5M Ω
Air duct pressure: less than or equal to 100mmH20 (limited to JDR-J series)
Dimensions of the main unit of the electric humidifier:
1. Schematic diagram and external dimensions of C-type open host
model
| model | JDR-3A(B) -C | JDR-5A-(B) -C | JDR-9A(B) －C | JDR-6A(B)- C | JDR－20A (B) －C | JDR－30A (B)－C | JDR－40A (B)-C | JDR－60A (B)－C | JDR－80A－(B)－C | JDR－120A(B)-C |
| A(mm) | 400 | 400 | 460 | 600 | 600 | 600 | 600 | 600 | 600 | 710 |
| B(mm) | 230 | 230 | 260 | 270 | 385 | 485 | 575 | 435 | 575 | 580 |
| C(mm) | 290 | 320 | 350 | 350 | 400 | 400 | 500 | 650 | 650 | 750 |
2. Schematic diagram and external dimensions of J-type takeover host
| model | JDR-3A (B)- J | JDR-5A (B)- J | JDR-9A (B)- J | JDR-16A (B)- J | JDR-20A (B)- J | JDR-30A (B)- J | JDR-40A (B)- J | JDR-60A (B)- J | JDR-80A (B)- J | JDR-120A (B)- J | JDR-200A (B)- J |
| A(mm) | 400 | 400 | 460 | 560 | 560 | 560 | 580 | 580 | 580 | 710 | 790 |
| B(mm) | 230 | 230 | 260 | 270 | 385 | 435 | 575 | 435 | 575 | 580 | 590 |
| C(mm) | 440 | 470 | 500 | 500 | 550 | 600 | 650 | 800 | 800 | 1000 | 1105 |
3. Indoor steam distributor
4. External dimensions of electric humidifier B-type proportional control box
5. Indoor steam distributor
Indoor steam distributor function: Directly spray the steam generated by the electric humidifier indoors, and the steam is evenly absorbed by the indoor air.
6. Quick absorption steam distribution diagram, quick absorption steam distributor function
|
The large amount of steam generated by the electric humidifier is evenly distributed over a large area in the air conditioning unit, and the steam is quickly absorbed by the airflow with a short absorption distance. |
Product accessories:
Product application industry:
Product usage case:
C Open Installation Diagram
Attention: When installing the C-type electric humidifier, the humidifier host is installed in the air conditioning box, while the electrical control box is installed outside the air conditioning box
Schematic diagram of J-shaped takeover installation
Attention: When installing the J-type electric humidifier, both the humidifier host and the electrical control box are installed outside the air conditioning box, and the steam distribution pipe is inserted or installed into the humidification section of the air conditioning box.
The installation position of steam distribution pipe in the air duct
1. The installation in the horizontal air duct and the humidification section of the horizontal air conditioning unit is shown in the following figure:
2. The installation in the vertical air duct and vertical air conditioning unit humidification section is shown in the following figure:
Configuration instructions for electric humidifier:
Body: Stainless steel N304S.S. main heating water tank with N sets of long-life electric heating tubes inside; Stainless steel float ball controls the inlet of the water tank, with a specially designed float ball valve inside; The low water level control box contains a travel protection switch to prevent dry burning without water;
Junction box; Composition of electrical control box, etc;
The electrical control box for the humidifier with ON/OFF switch quantity control includes: manual/automatic transfer switch, air switch, indicator light, relay, contactor, terminal block, etc., which can receive ON/OFF signals for operation;
The electrical control box for the proportional control humidifier includes: manual/automatic transfer switch, air switch, contactor, indicator light, relay, leakage protection, overload protection, terminal block, high-quality fan cooling SSR power output device, etc;
The voltage regulation module adopts a microcontroller design for protection, combined with IGBT as a power control device, powered by a DC power supply. The module is equipped with negative voltage feedback and has overcurrent, overheating, and short circuit functions. Linear proportional power output, control signal input: 0-5V or 4-20mA, LED LCD display Siemens controller, temperature and humidity sensor, etc.
Additional options:
Thermal insulation
Steam rapid distributor
Preheating function
Installation precautions:
1. Working voltage: not exceeding 1.1 times the rated value, and the casing should be effectively grounded.
2. Working medium: tap water or pure water that is not prone to scaling, corrosion, or impurities.
When installing the humidifier, it should be kept level and not tilted. When connecting the external water pipe, attention should be paid to the direction of the inlet valve not rotating.
During the work process, the exhaust hole should not be covered to avoid affecting the discharge of steam.
5. Do not adjust or remove the float valve and control switch at will to avoid damage.
6. The top rod of the travel switch in the control box should be checked regularly for debris or rust, and the top rod should be ensured to slide freely.
7. Regularly inspect and clean the surface of the electric heating tube and the scale inside the box, while ensuring that the connecting pipes between the water tank and the control box are unobstructed. When cleaning, simply open the cover plate of the box.
8. The power must be turned off during inspection and cleaning.
When not in use for a long time, the power and water sources should be turned off, and any remaining water in the box should be drained.
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-