Remote transmission magnetic flap level gaugeThe remote transmission of electrical signals is achieved by a combination of basic type and liquid level remote transmission device. The liquid level remote transmission device consists of a UR type resistance sensor and a UB type R/I conversion module. The sensor of the transmitter is fixed in a bundled form on the outside of the main tube of the UHZ type magnetic flap level gauge, so that it is in the same magnetic coupling system as the level gauge. When the magnetic float moves up and down with the liquid level, the reed switch corresponding to the liquid level position is attracted by the magnetic field inside the float, and the resistance value of the resistance chain changes. The changed resistance signal is converted into a two-wire 4-20mADC standard signal output through a conversion module. This signal can be easily used in conjunction with electric Type III instruments and display devices, as well as with light column indicators and digital display adjustment alarm devices, thus achieving the purpose of display, control, adjustment, and alarm. Remote transmission magnetic flap level gauge/level instrument series

Remote transmission magnetic flap level gaugedetailed parameters：

Brand: Kehao Remote Transmission Magnetic Flip Plate Liquid Level Gauge/Liquid Level Instrument Series

Model: KH/UHZ series

Remote transmission device for magnetic flap level gauge
Output signal: 4-20mA Load impedance: 350 Ω (at 24VDC)
Power supply: 18-30VDC (rated 24VDC) Environmental temperature:- 40～80℃
Relative humidity: ≤ 90% RH power consumption: 0.5W
Intrinsic safety type: ibIICT4 Explosion proof type: dIIBT4

Remote transmission magnetic flap level gauge control alarm switch
Output type: normally open and normally closed switch signal alarm accuracy: 10mm
Environmental temperature: -40~80 ℃ Working life: ≥ 105 times
Outgoing interface: M20? 1.5 or 3/4 "internal thread
Basic Type of Remote Transmission Magnetic Flip Plate Liquid Level Gauge
Measurement range: 300-15000mm Measurement accuracy: ± 5.0mm, ± 10mm
Working temperature:- 40-250 ℃ (ABS PP-R, PVC: -40-80 ℃) Special type can reach 450 ℃
Work pressure: ≤ 2.5MPa (juice can be set separately for 2.5MPa and above) anti-corrosion type ≤ 0.6MPa
Medium viscosity: ≤ 1st (10-4m2/s) medium density: ≥ 450kg/m3
Medium density difference: ≥ 150kg/m3 sewage outlet: ZG1/2 "(internal)
Environmental vibration: frequency ≤ 25Hz, amplitude ≤ 0.5mm Follow speed: ≤ 0.08m/s
Liquid receiving material: stainless steel (1Cr18Ni9Ti, 316L)
Stainless steel lined with polytetrafluoroethylene (1Cr18Ni9Ti lined with PTFE)
PVC plastic (polyvinyl chloride), PP-R，ABS
Connection process: Side mounted HG20592-97 DN25 PN4.0 (or user)
Top mounted HG20592-97 DN100 PN1.6 (or user)
Jacket flange HG20592-97 DN15 PN1.6 (or user)