CMP21 Total Radiation Meter

CMP 21 is a high-performance research grade total radiation meter that fully complies with various instrument performance requirements specified in the ISO 9060:1990 sub standard (currently the highest ISO total radiation meter performance category).

CMP 21 uses the same detector as CMP 11, and temperature compensation has been separately optimized. Additionally, it is equipped with a standard thermistor sensor to monitor the temperature of the casing. Each instrument also comes with its own temperature and direction (cosine response) test data.

This total radiation meter is suitable for scientific research and top-level solar radiation monitoring networks, such as WMO's BSRN (Global Reference Radiation Measurement Network).

The yellow signal cable is equipped with a waterproof socket, and there are multiple options for the pre wired length between it and the waterproof plug. The internally integrated bubble level has been raised to the top of the housing, allowing you to view the bubble level without removing the redesigned buckle sunshade, while also covering the connector. The drying box used is a screw in type, which is easy to remove and fill. The bag also contains a desiccant for replacement.

This total radiation meter does not require any power supply. When receiving incident radiation, it can provide a low voltage of 0-20mV. When a higher voltage or 4-20mA signal is required, AMPBOX is recommended.

specifications

More KIPP&ZONEN products are available.