KLQD-4 coke drop strength testing machine

1、 Overview of Coke Drop Strength Testing Machine:

The coke falling strength measuring device is suitable for measuring the falling strength of coke such as casting coke and metallurgical coke. The entire equipment consists of a motor, reducer, limit device, and control box, which can realize the opening of the test box safely and reliably. Complies with the national standard GB4511.2-1999 "Determination Method for Falling Strength of Coke". It belongs to coking enterprises and steel companiesneedTesting equipment.

2、 Principle of Coke Drop Strength Testing Machine:

Repeatedly drop the sample coke onto the steel plate at the specified height and crush it under stress. Filter out coke larger than 50mm and calculate its mass percentage. This device can lift and lower the coke sample box, and automatically open the bottom door of the sample box to discharge coke.

3、 Technical performance of coke falling strength testing machine:

Sample box (length x width x height mm): 710 x 455 x 380; Composed of 3mm thick steel plates.
Falling stage: composed of 12mm thick, 1220mm long, and 965mm wide steel plates. There are 200mm high steel plate frame edges installed around the falling platform.
Lifting bracket: The sample box can be vertically raised to 1830mm or lowered to any height.
Input power: 1.5 kW, working voltage 380V ± 10% (three-phase four wire system)
Weight: 400kg
Gearbox WPA-80- Reduction ratio 1:50-E