-
Product Introduction
The LB-7021 portable (direct reading) fast oil fume monitoring device can immediately obtain accurate oil fume emission data on site, which is fast, convenient, highly sensitive, and has good repeatability stability, greatly improving the monitoring efficiency of cooking oil fume. This product has been widely used by environmental monitoring departments and has received positive feedback.
Key Features:
1. Real time on-site detection, displaying the actual concentration value of oil fume emissions in real time;
2. Fully automatic measurement, high detection accuracy, and good data repeatability;
3. The sampling interval can be set between 2-15, and the average, maximum, and minimum values of oil fume emissions will be automatically calculated and displayed;
4. The operation is simple and convenient, just press a few keys to complete it;
5. Extremely low operating and maintenance costs;
6. Can detect various other non edible oil fumes;
7. Add wind speed, static pressure, temperature and humidity measurement functions;
8. Meet the technical requirements for environmental protection products and portable food fume detectors (HJ2526-2012) issued by the Ministry of Environmental Protection of China
Scope of application:
On site monitoring of cooking oil fume concentration in restaurants, dining halls, canteens and other units
2. Check the performance of the oil fume generator and the purification efficiency of the oil fume purifier
3. Detection of harmful smoke concentration in places where non edible oil fumes (such as asphalt smoke, pine cigarettes, etc.) are produced
4. Monitoring of other toxic smoke
Technical Specifications:
Measurement range:
lampblack:
0~60 mg/m³
Wind speed:
0-20 m/s
Static pressure:
0-10 kPa
temperature
-20℃—80℃
humidity
0% -95% (no condensation)
Oil fume accuracy:
± 0.2 mg/m ³, when the concentration is ≤ 4 mg/m ³, ± 5%, when the concentration is>4mg/m ³
Oil fume resolution:
0.1 mg/m³
Preheating time:
3 minutes
power supply
AC 220V+10%,50Hz
power waste:
≤200W
work environment
-20~50 ℃, humidity below 90% RH
Host size and weight:
360×260×150 mm 3.5kg
Sampling probe size and weight:
800mm 3kg
Pressure and temperature/humidity detection probe
700mm in length and weighing approximately 2kg
