Technical Specifications Table

Rated lifting capacity: 1T-20T

Ultimate span: 6m-30m

Effective lifting height: 6m, 9m, 12m, 18m, 24m

Job level: A3

Upgrading structure: BCD/BMD explosion-proof steel wire rope electric hoist

Type of lifting device: hook

Explosion proof grade: dIIBT4

Power supply: 380V 50HZ

Large wheel diameter: 300MM, 400MM

Product Description

Product Introduction

The LB crane is an explosion-proof version of the LD type electric single beam crane, which is used in conjunction with explosion-proof electric hoists such as BCD and BMD. It has become a lightweight and small crane that operates on rails, with a suitable lifting capacity of 1-16t, a suitable span of 7.5-22.5m, a working level of A3-A5, and a working environment temperature range of -25-+40 ℃. This product is a general purpose crane, mainly used in places with low frequency of use or low rated lifting capacity lifting times such as mechanical manufacturing, assembly, and warehouses. Something: Short ordering cycle, cost-effective; Disadvantages: The effective lifting height is relatively low, the shaking during use is relatively large, the working level is low, and it is not suitable for heavy workshops. This crane is equipped with three types of control modes: bottom face, control room, and remote control. The control room also has two types of door opening modes: end face and side face, for users to choose from.

The LB (LBD) explosion-proof electric single beam crane is designed based on "LDA" and according to GB3836.1-2000 "Explosion proof Electrical Equipment for Explosive Environments" and GB3836.2-2000 "Explosion proof Electrical Equipment for Explosive Environments". It has the characteristics of reasonable structure, beautiful appearance, and strong explosion-proof performance. The whole machine is used in conjunction with HB (BCD) and HBS (BMD) explosion-proof electric hoists, with a lifting capacity of 1-10 tons, a span of 7.5-22.5 meters, a working level of A3-A5, and a working environment of -25 ℃ to+40 ℃.
This product is widely used in factories, warehouses, and material yards of chemical units. It has two forms: ground and driver's cab. The driver's cab is divided into open and closed types, and the installation form is divided into left and right. The entrance direction is divided into side and end faces, allowing users to choose according to their respective usage situations.

This product is suitable for use in flammable and explosive environments. Explosion proof grade dIIBT4

This product has two operation modes: ground and operation room. There are two types of control rooms: open and closed. They can be installed on the left or right side according to the actual situation. The entrance direction has two types: side and end, to meet the needs of users in various situations.

Technical parameters of LB-16 ton explosion-proof electric single beam crane

Note: Gn=rated lifting tonnage S=span (distance from the center of the left track to the center of the right track) H=lifting height (distance from the ground to the highest point of the hook)