Plastic, pig iron, stainless steel, aluminum magnesium alloy, zinc alloy, copper, nickel plating, zinc plating, aluminum oxide, etc

Subverting the traditional 2D marking mode: realizing multiple 3D marking modes such as inclined plane, segment difference, cylinder, cone, sphere, and stretched surface.
The incredible super large central angle marking can reach 117 on a cylinder. The position of the central angle.
On the marked workpiece, perfectly present the target marking graphic to avoid deformation such as elongation and tilting. Make the engraved pattern closer to its original form.
Let the marking boundary no longer be 'ignored'! The marking effect on each position of the workpiece is uniform and consistent.
Subtle craftsmanship is fully displayed, no matter from any angle, what you see is exquisite and ultimate!
Simple and easy to use is beauty! A completely self-developed marking software system, easy to learn and use, what you see is what you get.

PRODUCT MODEL	LQ68 series 2D laser marking machine
wavelength	10.64nm
Spot quality	<1.2㎡
laser power	50W,60W,100W,150W
Cooling method	forced air cooling
Scope	600mm*600mm-1500mm*1500mm
focal length	163mm
Minimum line width	0.35mm
Minimum character	2mm
Marking line speed	0-700mm/s
Graphic format supported	BMP, PLT, AI, DFX, etc
voltage	AC220V±10%
Main frequency	50Hz/60Hz
Machine size	1664mm*1240mm*1779mm
Weight	80Kg
Usage environment	Temperature: 0-45 ℃; Humidity: 5% -95% No condensation, dust-free or less dust
Whole machine power	800W
Safety protection level	IP53
Laser safety level	Category 4
The distance between the workbench and the lens	160-284mm
Table size and dimensions	210mm*150mm