LYThe series of wet electrostatic precipitators maximizes purification efficiency with the concept of energy conservation and environmental protection, while minimizing wind resistance, water consumption, and electricity consumption.

The equipment adopts a tube bundle design, with a vertical approach to better increase the fluidity of oil fume particles and the flexibility of the site space during equipment installation.

Both needle and thread electrodes and bundle collection plates are made of stainless steel material, which gives them superior durability and corrosion resistance, maximizing the service life of the equipment.

Wet electrostatic precipitator is a new dust removal equipment used to treat trace dust and micro particles, mainly used to remove dust, acid mist, and water from wet gases

Droplets, aerosols, odors, PM2.5 and other harmful substances are ideal equipment for controlling atmospheric dust pollution

Wet electrostatic precipitator, commonly referred to as WESP, has the same basic principle of dust removal as dry electrostatic precipitator, which involves three stages of charging, collection, and cleaning.

WESPIt has high dust removal efficiency, low pressure loss, simple operation, low energy consumption, no moving parts, no secondary dust, low maintenance costs, and production downtime

Short term, can work below the dew point temperature of flue gas, can be combined with other flue gas treatment equipment due to its compact structure, and has diversified design forms

The wet electrostatic precipitator uses liquid to wash the surface of the dust collection electrode for dust cleaning, which can effectively collect fine particles (PM2.5 dust, SO3 acid mist, air soluble)

Gum, heavy metals (Hg, As, Se, Pb, Cr), organic pollutants (polycyclic aromatic hydrocarbons, dioxin), etc. Wet flue gas after using a wet electrostatic precipitator

The smoke and dust emissions in the medium can reach 10mg/m 'or even below 5mg/m'; Dust collection performance is independent of dust characteristics and is suitable for the treatment of wet flue gas, especially in the field of electricity

In the treatment of dust containing flue gas after wet desulfurization in factories and steel mills, the equipment investment cost is relatively high and needs to be used in conjunction with other dust removal equipment, which is technically and economically feasible

Sex and operational costs should be evaluated as a whole.

Process flowchart:

technological process

After being collected by the suction hood collection system, dust particles, smoke particles, and oil fumes are pretreated by a square cyclone washing tower and then reduced

The temperature module drops below 60 ° C and then enters the black smoke purification equipment, where it ionizes the black smoke into positive and negative ions under the action of a high-energy electric field

Zi, charged particles flow through a composite high-voltage electric field and are quickly captured and adsorbed, thereby achieving the goal of black smoke purification, with significant and immediate effects.

Industry Applications
Wet static electricity can be widely used in: purification of oil mist for textile shaping, purification of oil mist for plastic secondary granulation, and black smoke from garbage incineration
Purification, boiler black smoke and exhaust gas purification, large kitchen oil fume and exhaust gas purification, industrial oil fume purification, etc!