Overview of LR-6000C Integrated Adhesive Strength Tester
The LR-6000C integrated bonding strength tester (hereinafter referred to as the tester) is suitable for testing the bonding strength of decorative tiles, mosaics, various boards, paints, coatings, and various exterior wall building materials.
The main body of the detector is a portable hydraulic jack, and the pressure device and hollow jack are designed with a one-piece structure, which is easy to carry and test. The pressure display part adopts our company's newly developed intelligent pressure strain gauge, with a fully Chinese operating interface and functions such as automatic reset, peak holding, fast storage, under voltage reminder, over range display, and intelligent calibration.
The detector adopts an integrated design of display instrument and instrument host, without the need to connect the instrument, and can be used directly after startup, making on-site detection more convenient and efficient. The oil pump of the detector adopts screw drive and manual loading. Adopting a unique and innovative mechanical design, the screw does not need to be shaken out in advance before the experiment, which has the characteristics of small driving torque, comfortable and reasonable shaking direction, continuous and uniform loading, and stable body.
LR-6000C integrated bond strength tester applicable standards:
JG/T507 "Digital Adhesive Strength Tester"
JGJ110 "Inspection Standard for Bonding Strength of Decorative Bricks in Building Engineering"
JGJ126 "Code for Construction and Acceptance of Exterior Wall Decorative Brick Engineering"
JGJ144 Technical Specification for External Wall Insulation Engineering
JG158 "Rubber powder polystyrene particle external wall insulation system"
JG149 "Expanded polystyrene board thin plastering external wall insulation system"
Technical specifications and parameters of LR-6000C integrated bond strength tester:
Integrated design of embedded measurement LCD display circuit
Peak holding function
Pressure measurement and display (area can be customized)
Measure 10 segments of polyline correction
*Large test tensile value: 10KN
Piston stroke: 10mm
Bracket span: ≥ 120mm
Host weight: 2KG
Accuracy level: ≤ 1.0% F.S
LCD display: 2.1-inch blue segment LCD
Resolution: 0.001KN
Can store measurement data (500 pieces)
Sensor: Bridge voltage 5V, mA signal output
Usage environment: Temperature -10~50C, relative humidity 0~90% RH Power supply: 8.4V lithium battery.