The shrinkage rate of textiles varies depending on the raw materials used. Generally speaking, fibers with high moisture absorption tend to expand and increase in diameter after being soaked in water. The factors that cause shrinkage in the fabric include shortened length and higher shrinkage rate. For the textile industry, VicometoVM-TLeather moisture analyzer​It can solve the problem of measuring the moisture content of textile raw materials without any damage to the surface of the tested item.

​

VM-TLeather moisture analyzer​​Operation steps:

After stacking the thickness of the measuring object such as fabric, clothing, leather, etc. to 50mm or more, place it on a table or the ground, hold the lower part of the instrument, roughly parallel the instrument housing to the measured object, and gently press the instrument probe onto the measured object. After the data is stable, it is the moisture regain value of the substance.Easy to operate, precise calculation!

Vicometo brandVM-T moisture analyzerHas the following characteristics:
1. VM-T textile raw material moisture meter adopts high-frequency principle, LCD digital display, and the probe is integrated with the host.

2. When using the VM-T textile raw material moisture meter to detect the moisture content of fabrics, yarns, textiles, etc., simply place the instrument probe against the surface of the measured object to determine its moisture content. The measurement is fast and can be completed in one second.

3. The VM-T textile raw material moisture analyzer has stable performance, accurate measurement, and no destructive effect on the surface of the measured object.

4. VM-T textile raw material moisture analyzer has a small volume and light weight, and can be carried on site for rapid detection. It is a good helper for on-site detection personnel to detect moisture content.

Vicometo brandVM-T moisture analyzerWidely used in industries such as fabrics, clothing, yarns, axial yarns, tubular yarns, cotton yarn, gauze, cowhide, leather, leather products, textiles, etc. that require rapid determination of moisture regain.

1When measuring, hold the lower half of the instrument in hand, keep the body of the instrument parallel to the object being measured, and gently press the three sensing probes of the instrument onto the object being measuredThe surface is sufficient.

2Due to the strong penetrability of high-frequency waves, the presence of metal around the measured object can lead to inaccurate measurements. Therefore, during measurement, there should be no metal or other sensing objects around the instrument probe.
3The moisture meter is a contact type measuring instrument, and the prerequisite for measurement is that the three sensing probes of the instrument must be in full contact with the measured object.
4When there is no display or the zero value cannot be adjusted within ± 00.5, and the display number jumps, the battery should be replaced at this time. The battery is located below the back of the instrument. Unscrew the screws on the battery cover, remove the old battery, and replace it with a new one. If the battery cannot be zeroed after replacement, please open the battery back cover one by one and find the tail zeroing knob,Use a flat screwdriver to adjust the potentiometer in the hole, so that the zero position of the instrument is within 00.5.
5. If the instrument is not used for a long time, the battery should be removed to prevent damage to the instrument caused by battery leakage.