VIP member
Leica DMI5000M metallographic microscope
Product Code: DMI5000M Product Model: DMI5000M Category: Metallographic Microscope Brand: Leica, Germany Purpose: Metallographic and Petrographic Anal
Product details
Free setting focus management system
Four of the freely programmable buttons are located on the left-hand side of the microscope. The focusing management system is located on the right-hand side of the microscope and can store, manage, and move to
There are three buttons available on the right side. If using Smart Move with two focal planes. In addition to storing the focal plane, the lowest limit can also be stored to ensure accuracy
The remote control component also has four freely programmable buttons for use. Even in complex stage settings, the objective lens can be reliably transformed.
Use these buttons to configure the microscope, and the microscope will match
Meet the requirements of the user.
Steel purity inspection
The microscope system used to evaluate steel purity must meet strict requirements. Leica DFC450 digital color CCD, DMI5000 M microscope, and "Steel Expert" analysis software
Leica DMI5000 M：
*The electric focusing and autofocus management system work together to ensure clear images are obtained at all times - even after changing the magnification.
*Press the button to activate the built-in "inclusion counting" software.
*Fully automatic switching between panorama and observation object
Leica DFC450：
*CCD has FireWire port for fast image transfer
Leica Steel Expert software:
*The software solution is equipped with driver modules for cameras and microscopes, allowing for remote control of the entire system.
Steel purity testing has become simpler
The Leica DMI5000 M with "inclusion analysis" allows you to quickly and easily perform steel purity testing. As long as the button is pressed, a field of view with an area of 0.71 × 0.71mm and an objective magnification of 10x can be achieved. This allows users to determine purity completely according to standard requirements.
A thinking microscope
The combination of Leica DMI5000 M and the "Steel Expert" software package is an ideal tool for conducting steel purity testing. The routine work of software includes rapid and convenient evaluation of sulfides, silicates, or TiN inclusions. You can use 'Steel Expert' to handle different standards and solve their conversions. Users only need to input the standards to be used for inspection into the program, and the rest of the work is done by Leica DMI5000 M Steel Expert.
As far as the eye can see, it is clear in the chest
The parameter display screen makes it easy for users to see at a glance. All information related to the objective lens, overall magnification, observation method, or current light intensity setting is displayed, including the current stage and focusing position.
stick out a mile
Press the button on the front panel to access the most important functions: switching observation methods, optical zoom, or the current CCD output terminal. Feedback information will immediately appear on the monitor.
The design of the status display controller is clear and concise
All current settings of the microscope are clear at a glance: the current observation method and important functions are displayed on the front control panel. Each mirror can be directly controlled
The selected magnification, set light intensity parameters, and selected CCD system. Press the button to open or close the shutter, connect the CCD output terminal or adjust the specimen
The relevant information of the output terminal and focal plane can be read from the display. Optical zoom. Feedback information will immediately appear on the monitor.
Press the button to focus
Brand new: Automatic focusing software for digital CCD. When using Leica DFC295 and DFC450, users can now use autofocus software that automatically finds and saves the focal plane.
All encompassing digital CCDs
Leica digital CCD is equipped with a standard FireWire port for quickly transferring images to PCs and Macintosh computers. Color digital CCD, to monochrome cold CCD used for high-definition fluorescent images. All digital CCDs have multiple resolutions and can use real-time image mode.
Double observation, double discovery
The Leica DMI5000 M has three camera outputs that can be matched with various CCDs. Two electric outputs (left and right) allow you to switch between 0/100%, 50/50%, or 80/20% as required - all work is done with buttons. The exit on the lens barrel is designed for users who have accessories on both sides but no space. Users can freely choose which port to use and how much light these ports will receive. By combining 13 different components - optical prisms with varying light transmittance - various CCD output results can be generated to meet the different needs of users.
Repetition is inevitable
The same experiment is often repeated with new specimens several weeks or even months later for comparison. This software module stores all the settings of the microscope, including images. If specimen images must be obtained under the same conditions, simply press the button and the microscope will return to its original conditions.
Electric side light path exit
A 4-digit electric disc controls 2 lateral ports, which can be equipped with a spectroscope according to personal requirements to direct 100%, 80%, or 50% of the light to the left or right output port. You just need to press the button and set it to the desired position.
Top CCD output terminal
Leica DMI5000M metallographic microscope technical specifications:
Leica DMI5000M metallographic microscope dimensions
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-