Limited reflection micro photoelectric sensor [amplifier built-in] PM2 series PM2-LH10 (PM2-LH10B)-Fornitore globale

Restricted reflective type to ensure stable detection

※1

※2

※1	EMC Designated Applicable
※2	Certification obtained

characteristic

Stable detection of limited reflection mode

Due to the fact that the limited reflection type is detected within a limited range, it has the characteristic of stable detection.

Not affected by background

If the sensor is placed within 30mm, even with a glossy background, it will not affect the detection performance.
(However, the glossy background should have a flat surface and be facing the sensor. Spherical or curved backgrounds may be detected.)

Can detect dark objects

Due to the sensitivity of the sensor, it can detect dark objects with low reflectivity.

Even small objects can be detected

A copper wire with a diameter of 0.05mm can be detected within a distance of 5mm.

Equipped with cable type

No need for tedious welding, can save space and improve reliability.

type

specifications

type		connector
		Top detection	Positive detection	L-type (top detection)
type name	ON when entering the light	PM2-LH10	PM2-LF10	PM2-LL10
	ON when not illuminated	PM2-LH10B	PM2-LF10B	PM2-LL10B
detection distance		2.5-8mm (center: 5mm) (15 × 15mm white matte paper) (Note 2)
Minimum detectable object		0.05mm copper wire (set distance: 5mm)
Ying Cha		Use white matte paper (15 × 15mm) for less than 20% of the working distance
Repetitive accuracy (perpendicular to the detection axis)		Below 0.08mm (Note 3)
supply voltage		5-24V DC ± 10% pulsation P-P5% or less
Consumption current		Average: below 25mA, peak: below 80mA
output		NPN open collector transistor Maximum incoming current: 100mA External voltage: below 30V DC (between output and 0V) Remaining voltage: Below 1V (when the incoming current is 100mA) Below 0.4V (when the incoming current is 16mA)
	Overcurrent protection	equip
reaction time		Below 0.8ms
Work status indicator light		Red LED (lights up when output is ON)
ring area sexually ability	Environmental temperature for use	-10 to+55 ℃ (note not to condense or freeze), during storage: - 25～＋80℃
	Environmental humidity for use	45-85% RH, during storage: 45-85% RH
	Use environmental illumination	Incandescent lamp: Light receiving surface illumination below 3500lx
	Vibration	Frequency range of 10-55Hz, double amplitude of 1.5mm, X, Y, and Z directions for 2 hours each
	Impact resistance	Acceleration 500m/s²(Approximately 50G) 3 times each in the X, Y, and Z directions
Projection element		Infrared LED (peak wavelength of 880nm, modulation type)
material		Shell: polycarbonate, terminal part: copper alloy (silver plated)
cable		-
Wiring length		0.3mm²The total length of the above cables can be extended to 2m If the cable is extended to more than 2m, a 10 μ F capacitor must be connected between the 0V and+1V terminals
weight		Body weight: approximately 4.5g Packaging weight: approximately 85g (10 pack)		Body weight: approximately 4g Packaging weight: approximately 80g (10 pack)

(Note 1): When not specified, the measurement condition is an ambient temperature of+23 ℃.
(Note 2): The detection distance of white matte paper can be extended to 12.5mm according to product changes.
(Note 3): The repeatability accuracy is the value for white matte paper (15 × 15mm) set at a distance of 5mm.

type		Cable type
		Top detection	Positive detection	L-type (top detection)
type name	ON when entering the light	PM2-LH10-C1	PM2-LF10-C1	PM2-LL10-C1
	ON when not illuminated	PM2-LH10B-C1	PM2-LF10B-C1	PM2-LL10B-C1
detection distance		2.5-8mm (center: 5mm) (15 × 15mm white matte paper) (Note 2)
Minimum detectable object		0.05mm copper wire (set distance: 5mm)
Ying Cha		Use white matte paper (15 × 15mm) for less than 20% of the working distance
Repetitive accuracy (perpendicular to the detection axis)		Below 0.08mm (Note 3)
supply voltage		5-24V DC ± 10% pulsation P-P5% or less
Consumption current		Average: below 25mA, peak: below 80mA
output		NPN open collector transistor Maximum incoming current: 100mA External voltage: below 30V DC (between output and 0V) Remaining voltage: Below 1V (when the incoming current is 100mA) Below 0.4V (when the incoming current is 16mA)
	Overcurrent protection	equip
reaction time		Below 0.8ms
Work status indicator light		Red LED (lights up when output is ON)
ring area sexually ability	Environmental temperature for use	-10 to+55 ℃ (note not to condense or freeze), during storage: - 25～＋80℃
	Environmental humidity for use	45-85% RH, during storage: 45-85% RH
	Use environmental illumination	Incandescent lamp: Light receiving surface illumination below 3500lx
	Vibration	Frequency range of 10-55Hz, double amplitude of 1.5mm, X, Y, and Z directions for 2 hours each
	Impact resistance	Acceleration 500m/s²(Approximately 50G) 3 times each in the X, Y, and Z directions
Projection element		Infrared LED (peak wavelength of 880nm, modulation type)
material		Shell: polycarbonate, fixed cable part: PBT
cable		0.2mm²3-core rubber cable, 1m long (Note 4)
Wiring length		-
weight		Body weight: approximately 25g Packaging weight: approximately 330g (10 pack)

(Note 1): When not specified, the measurement condition is an ambient temperature of+23 ℃.
(Note 2): The detection distance of white matte paper can be extended to 12.5mm according to product changes.
(Note 3): The repeatability accuracy is the value for white matte paper (15 × 15mm) set at a distance of 5mm.
(Note 4): The cable cannot be extended.