YT-0221Liquefied petroleum gas density testerAdaptation criteria: SH/T0221、ASTMD1657、ISO3993

YT-0221Liquefied petroleum gas density testerSuitable for measuring the density of liquefied petroleum gas and light hydrocarbons. At the test temperature, samples with a vapor pressure (gauge pressure) higher than 1.4 MPa should not use this instrument.

Technical Parameter

Mixing motor power: 15W

2. Mixing motor speed: 1250r/min

Heating power: 1800W

4. Compressor power: 280W

5. Temperature control accuracy: 15 ± 0.2 ℃ or 20 ± 0.2 ℃

Cylinder bears pressure: 1.4Mpa

7. Environmental temperature: 5 ℃~45 ℃ Relative humidity: ≤ 85%

Working power supply: AC220V±10%，50Hz

9. Dimensions: 700mm × 450mm × 800mm

Weight: 40kg

Instrument characteristics

1. All three valves are made of 1Cr18Ni9Ti material and can withstand a pressure of 4Mpa.

2. The cylinder is made of transparent organic glass and sealed at both ends with metal end plates and chloroprene rubber gaskets.

3. The water bath is made of 1Cr18Ni9Ti material, equipped with an electric heater and electric stirring device, and a temperature automatic adjustment system, which can meet the test temperature of 15 ± 0.2 ℃ or 20 ± 0.2 ℃.

4. The temperature control device adopts digital display, with sensitive response and accurate temperature control.

5. The mixer consists of a motor, a mixing shaft, and blades, with low noise and high efficiency.

6. The refrigeration method adopts compressor refrigeration.