VIP member
Low temperature constant temperature incubator IL612C/812C
Low temperature constant temperature incubator IL612C/812C
Product details
A multifunctional low-temperature constant temperature incubator with gas jacket heat transfer method.
Characteristics
·Use environmentally friendly refrigerant R134a.
·High precision control and uniform temperature distribution accuracy in the groove have been achieved through gas sleeve heat transfer and computer PID control.
·The controller includes an independent over rise prevention circuit, which realizes constant value operation, automatic stop operation, automatic start operation as the main function, defrosting function RS485 communication function, temperature output terminal (4~20mA), and alarm output terminal as auxiliary functions. （IL612C）
·Equipped with an electronic independent overheat preventer, it is equipped with a CR5 controller that mainly operates with a maximum of 99 steps of program running, constant value running, automatic stop running, and automatic start running. It has RS485 communication function, temperature output terminals (1-5V), and alarm output terminals as auxiliary. （IL812C）
·By using the communication cable of the optional product, remote operation can be achieved by separating the control panel from the main body.
Security
It is equipped with self diagnostic function, freezer thermal overload protector, freezer delayed start protection function, over rise protector, leakage protection switch to prevent overcurrent, button lock and other safety functions.
Specifications
|
model |
IL612C |
IL812C |
|
|
mode |
Conduction and radiation |
||
|
performance |
Temperature range for use |
0～50℃ |
|
|
Temperature regulation accuracy |
± 0.3 ℃ during continuous operation of the freezer, ± 1.0 ℃ during ON/OFF operation of the freezer (at 37 ℃) |
||
|
Temperature distribution accuracy |
± 1.0 ℃ (when the at37 ℃ freezer is running continuously) |
||
|
constitute |
Inner door |
Tempered glass 5mm |
|
|
Thermal insulation material |
polyurethane foam |
||
|
freezer |
300W R134a |
||
|
Defrosting structure |
Manual defrosting/cyclic defrosting |
||
|
heater |
Nickel chromium alloy heating wire, 800W |
Nickel chromium alloy heating wire, 850W |
|
|
sensor |
Dual sensing wires, platinum temperature measuring resistor PT100 (for temperature control)+K-type thermocouple (for over rise prevention) |
||
|
Overlift preventer |
Electronic integrated control type |
Electronic independent type |
|
|
Door lock |
1individual |
||
|
Lead hole |
Inner diameter 50mm (right side of the body) |
||
|
Temperature regulator |
VS3P PIDcontrol |
CR5 PIDcontrol |
|
|
work |
Fixed value, timed |
Fixed value, timed, maximum 99 step program |
|
|
Safety device |
Self diagnostic function, overcurrent leakage circuit breaker, freezer overload relay, freezer protection delay timing function, over rise protector (IL612C), independent over rise protector (IL812C) |
||
|
Specifications |
Internal dimensions (width x depth x height mm) |
600×530×500 |
600×530×1000 |
|
Dimensions (width x depth x height mm) |
710×645×1008 |
710×645×1600 |
|
|
Internal volume |
159L |
300L |
|
|
Shed board load-bearing capacity |
15kg/layer |
||
|
Number of layers/spacing between shed boards |
12Layer/30mm |
24Layer/30mm |
|
|
Rated current of power supply (50/60Hz) |
AC220V 7A |
AC220V 8A |
|
|
weight |
About 90kg |
About 150kg |
|
|
Accessories |
Shed board |
Stainless steel stamping mesh plate |
|
|
3piece |
5piece |
||
|
Shed Shou |
6piece |
10piece |
|
|
Door key |
2individual |
||
|
Product selection |
Stand up platform |
ON61C |
— |
|
other |
Shed board (1 shed board includes 2 shed receivers), lead hole (30/50mm), recorder, combination warning light (standby/running/fault), observation window, external communication function (RS485), temperature output terminal (4-20mA), external alarm output terminal, time arrival output terminal |
||
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-