5-axis motor servo independent control+low thinning rate assisted pipe bending machine+1-3 layer pipe bending mold, with a maximum bending capacity of 63.5 mm pipe diameter

SB-66x5A-3S-PT ( +2C )The pipe bending machine is a high-speed fully automatic control pipe bending machine, equipped with motor servo or hydraulic proportional servo valve according to different models, and multi axis control. The pipe bending capacity is below 63.5mm in diameter. According to different user needs, various bending functions can be equipped, such as 1D material assistanceIB Interface Zone Booster for short pieces and DBS Double Blades Shearing technology.

The main function of the PT series pipe bending machine is to control the thinning rate of the pipe wall. Powerful material assisted technology can control wall thinning within 18% when the pipe diameter is 50.8 mm and the bending radius is 1 x OD. The PT series pipe bending machine can be used in the production of exhaust pipes, intake and exhaust manifolds, and other spare parts for steam turbines and vehicles.

Machine features:

• Equipped with a powerful material assist system ranging from 6 to 22 tons, the pipe wall thinning is controlled within 15% to 20%
• The PT series pipe bending machine is equipped with pull bending+1D assisted bending+DBS cutting technology (2C) and final bending assisted technology (IB). In addition, there is also control over the thinning rate of the pipe wall.
• The 2C SOCO DBS dual blade cutting technology can automatically cut after bending the pipe, greatly reducing the loss of material heads and tails
• IB - End turn assist technology, reducing waste and increasing output (optional)
• Powerful material assisted technology can control the thinning rate of the pipe wall at the bending part of the workpiece during bending (*)
• Equipped with a customizable core rod advance core pulling function and an automatic core rod lubrication system
• Each layer of the mold can be equipped with a separately controlled guide mode assist speed, or an SPD single guide mode system
• Equipped with adjustable anti wrinkle plate fixing seat and lubrication system, it can simultaneously specify 4 different bending pipe workpiece programs, which are automatically executed in sequence to achieve the benefits of supporting production
• The feeding method can be selected as direct feeding or pinch feeding
• All sliding tracks of mobile components are equipped with manual centralized lubrication equipment, such as auxiliary sliding tracks, main clamp sliding tracks, material assisted sliding tracks, etc
• Can connect SOCO automated feeding and unloading equipment
• Hehe company's patented operating software, equipped with IPC (industrial computer) and touch screen
• The feeding seat can be equipped with an external expansion clamp, which can shorten the length of the material tail (optional)
• Can be paired with interference simulation software, and the operator can first input parameters to check whether collisions or sequence errors will occur (optional)
• It can record production hours and quantities in the hard drive, as well as record errors, and can be connected to a printer to print data (i-Report) (optional)

The thinning rate will have different torque requirements depending on the outer diameter, thickness, and material of the pipe fittings