VIP member
M1350C cylindrical grinder
Introduction -1. Main specifications and parameters of M1350C cylindrical grinder equipment: 1. The machine tool specifications and parameters comply
Product details
1、 Main specifications and parameters of M1350C cylindrical grinder equipment:
1 The specifications and parameters of the machine tool comply withJB/T 7418.1-94 "Classification of External Grinding Machine Series", the geometric accuracy and working accuracy of the machine tool comply with the "Quality Grading Regulations for External Grinding Machines".
|
2 |
Outer circle grinding diameter range: |
30～500mm |
|
3 |
Grinding length of larger workpieces: |
3000mm |
|
4 |
Load bearing capacity of larger workpieces: |
1000 kg |
|
5 |
Center height: |
270mm |
|
6 |
Workbench feedback angle clockwise: |
2° |
|
|
anti-clockwise: |
2° |
|
7 |
The workbench moves at a high speed/Smaller: |
0.1-3 m/min |
|
8 |
The workbench has a large amount of movement: |
3050mm |
|
9 |
The workbench handwheel transfers momentum |
3mm |
|
10 |
Specification of outer circular grinding wheel(outside diameter/wide/inside diameter)： |
Φ750χ75χΦ305 |
|
11 |
Hand wheel of grinding wheel holder transfers momentum: |
1mm |
|
12 |
Grinding wheel holder handwheel micro feed once(radial direction)：0.002mm |
|
|
13 |
Rapid advance and retreat of grinding wheel rack |
100mm |
|
14 |
Large movement of the grinding wheel holder |
355mm(including rapid movement) |
|
15 |
The lead screw of the grinding wheel rack has a large amount of movement when manually operated |
170mm |
|
16 |
Grinding wheel linear velocity（m/s）： |
35m/s |
|
17 |
Tail rack top movement amount (manual) |
70mm |
|
18 |
Dial speed(r/min): |
17、34、48、67、95、132 |
|
19 |
Head and tail frame top taper hole number: |
mohs6# |
|
20 |
Machine power: |
|
|
|
1）Grinding wheel holder motor |
11Kw |
|
|
2）Headframe motor |
2.2/3.3Kw |
|
|
3）Hydraulic pump motor |
1.5Kw |
|
|
4）Total power |
≈17.3Kw |
II Machine tool working accuracy(According to national standards GB/T 4685-94 check and accept)：
The specifications of the processed test piece areP1：Φ100×1000mmThe outer circle
|
1 |
Roundness: |
≤0.0025mm |
|
2 |
Consistency of inner diameter in longitudinal section: |
≤0.008mm |
|
3 |
roughness: |
≤Ra0.32μm |
3、 Main Performance Description
M1350C cylindrical grinder is suitable for grinding the outer circle of cylindrical or conical rotating workpieces
The grinding.
2. The longitudinal movement of the machine tool worktable is driven by hydraulic continuously variable transmission, or by a handwheel
Drive. The upper and lower workbenches can rotate a certain angle, suitable for grinding conical workpieces.
3. The worktable guide surface adopts plastic coated guide rails, with forced oil supply lubrication, shock absorption and wear resistance, and low-speed operation
Smooth operation.
4. The horizontal feed of the grinding wheel rack is driven by hydraulic pressure to achieve rapid advance and retreat; Handwheel drive achieves coarse feed,
Hand lift implementation every time0.002mmThe refinement is given. The guide rail adopts a roller form.
5. The grinding wheel spindle is supported by high rigidity sleeve type dynamic and static pressure bearings, which have high rotation accuracy and rigidity
Okay. Equipped with an independent fuel supply device.
6. The headband adopts a dual speed motor - three speed gear transmission, which is easy to operate. The headboard spindle adopts
The spindle fixed structure has good rigidity. Drive the workpiece to rotate through the headstock dial.
7. Workpiece spindle, grinding wheel spindle, cooling pump, hydraulic pump, grinding wheel spindle lubrication pump, respectively
Driven by an independent motor.
8. The moving parts of the machine tool have electrical, hydraulic, and mechanical interlocking mechanisms, and the overall layout is reasonable,
Beautiful appearance, centralized and vivid operating handle, easy and safe operation.
9. Grinding wheel dressing has two dressing methods: installing a dressing device on the table and installing it on the tailstock.
10. The electrical cabinet, hydraulic oil tank, and coolant tank used in the machine tool are independently installed, adjusted, and installed
The maintenance is very convenient.
11. The machine tool is equipped with a semi protective device with guide rail protection, which complies with safety regulations.
QLCT fully connected machine tool warm reminder: Due to continuous design improvement, the above machine tool technical parameters are for reference only. If there are any changes in paint color, no further notice will be given. We apologize for any inconvenience caused and thank you for your cooperation!
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-