VIP member
MC-2010A Coating Thickness Tester
1、 Overview of MC-2010A Coating Thickness Tester Application Scope: This instrument adopts magnetic thickness measurement method, which can convenient
Product details
1、 Overview
MC-2010A Coating Thickness TesterApplication scope: This instrument adopts magnetic thickness measurement method, which can conveniently and non destructively measure the thickness of non-magnetic coatings on ferromagnetic materials, such as zinc, copper, chromium coatings on steel surfaces or coatings of paint, enamel, fiberglass, spray coating, asphalt, etc. This instrument is widely used in industries such as machinery, automotive, shipbuilding, petroleum, chemical, electroplating, spraying, enamel, plastics, etc.
Working principle of MC-2010A coating thickness gauge: The MC-2010A coating thickness gauge uses electromagnetic induction method to measure the thickness of the coating. The probe located on the surface of the component generates a closed magnetic circuit, which will change to varying degrees as the distance between the probe and the ferromagnetic material changes, causing changes in magnetic resistance and probe coil inductance. This principle can be used to measure the distance between the probe and the ferromagnetic material, that is, the thickness of the coating (plating) layer.
2、 Product performance
MC-2010A Coating Thickness TesterTechnical Parameter
1. Measurement range: 0~1200um
2. Measurement error:< 3%±1um
3. Small indication: 1um
4. Display mode: 4-digit LCD digital display
5. Main functions:
(1). Measurement: Full range thickness measurement with built-in probe
(2). Statistics: There are three statistical measures: mean, value, and small value
(3). Calibration: Zero point calibration, two-point calibration, and system calibration can be performed
(4). Battery level: Equipped with undervoltage display function
(5). Beeming prompt: There is a buzzing prompt during the operation process
(6). Shutdown: There are two ways to shut down: automatic shutdown and manual shutdown
6. Power supply: Two 1.5V batteries
7. Power consumption: 90MW
8. Dimensions: 112mm * 44mm * 25mm
9. Weight: 100g (including battery)
10. Operating environment temperature: 0 ℃~+40 ℃ Relative humidity: not exceeding 90%
11. Small thickness of substrate: 0.5mm
12. Diameter of the substrate small plane: 7mm
13. Small curvature radius: convex: 1.5mm concave: 6mm
14. Under voltage indication: displayed in the upper right corner
*Critical thickness value: When the iron-based thickness of the workpiece is greater than 1mm, the measurement of the coating thickness is not affected by the iron-based thickness.
IIIMC-2010A Coating Thickness TesterConfiguration sheet
operation instructions
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-