Not just powerful oscilloscopes.

The mainstream in today's engineering field are multi-core processors, serial buses, and wireless interfaces. The core of MDO3000 is a mature and reliable Tektronix oscilloscope with a basic spectrum analyzer and digital voltmeter. Then, you can customize according to the testing requirements. Adding 16 logical channels, a 50 MHz arbitrary waveform/function generator, protocol analysis, and an extended 3 GHz spectrum analyzer can help meet the requirements of current and future complex designs.

Please refer to within this scope

characteristic

• Award winning oscilloscope with 125 trigger combinations
• Through Wave Inspector ® Control reaches a record length of 10 M points
• Standard configuration of basic spectrum analyzer
• Add instruments and functions according to testing requirements

Accurate measurement is important

Simply put, the MDO3000 series oscilloscope is designed to achieve accurate measurements. When many other instruments only provide low resolution display data, the MDO3000 can measure the actual collected data and view your design seamlessly. In fact, we are very confident in the technical specifications provided by MDO3000, giving you full confidence when measuring. After all, measurement accuracy affects design integrity. Why use less accurate equipment?

Ensure 18 technical specifications. Industry leading precision. Understand its importance

High cost-effective probe: provided for free.

As a key component in measuring signal paths, probes cannot be ignored. When purchasing MDO3000, you will receive industry-leading probes for free. Due to its excellent load (3.9 pF) and high bandwidth that matches your oscilloscope, the TPP series probe will be the portable probe for your daily use.

Understand the impact of probes on measurement

Understand how Tektronix probes can improve accuracy

characteristic

• TPP series probes are standard, one for each analog channel
• 3.9 pF industry-leading capacitive performance probe
• 250 MHz, 500 MHz, or 1 GHz probe bandwidth can meet the bandwidth requirements of an oscilloscope

Even non RF experts can easily complete wireless measurements

Do wireless communication and EMI precautions make you feel annoyed? Perhaps, you are an RF expert and need an oscilloscope that can perform time-domain and frequency-domain measurements? Anyway, the MDO3000 oscilloscope with built-in spectrum analyzer is capable of handling the task. Unlike other oscilloscopes that offer FFT "spectrum analysis," only the MDO3000 comes with a built-in true spectrum analyzer for RF measurements in environments up to 3 GHz without leaving the oscilloscope.

MDO3000 series and conventional range FFT

characteristic

• Basic spectrum analyzer, standard configuration
• 3 GHz spectrum analyzer can be upgraded
• The only truly integrated hardware spectrum analyzer in the industry

An accident occurred. Ensure that you are protected.

We have a unique advantage in the industry for accidental damage protection programs. Yes, this includes screen damage, leakage, mounting bracket damage, electrostatic discharge, or electronic overload events. Use our 'Comprehensive Care Plan' to reduce unexpected repair or replacement costs. Watch the video or click below to learn more.

Learn more

Embedded serial bus triggering, decoding, and analysis

A single serial bus signal typically includes address, control, data, and clock information; It is difficult to single out events of interest. The serial application module of the MDO3000 series oscilloscope turns the oscilloscope into a powerful tool for debugging serial buses using automatic triggering, decoding, and searching.

characteristic

• I2C、SPI、RS-232 / 422 / 485 / UART
• CAN/CAN FD、LIN、FlexRay
• I2S/LJ/RJ/TDM
• MIL-STD-1553、USB

Detailed understanding of how to debug serial bus in embedded systems

Watch this video to learn about serial bus decoding

Power measurement and analysis

With the increasing demand for energy efficiency, designers and testing instruments are facing new challenges. Semiconductor devices with standby power limitation, higher switching speed and signal range, and lower leakage current are pushing testing conditions to new heights. MDO3000 can provide power testing solutions to meet these constantly changing requirements.

characteristic

• Measurement of power loss of switchgear
• Measurement and analysis of ripple and noise
• Verify power semiconductor devices
• Debugging active power factor correction circuit

Watch the troubleshooting video for power distribution in this embedded system

Read this application guide for power measurement and analysis using a desktop oscilloscope

Electromagnetic interference (EMI) and electromagnetic compatibility (EMC)

There is always a risk of failure when performing design EMI/EMC testing; This leads to schedule and budget issues. The MDO3000 with built-in spectrum analyzer allows you to perform pre consistency testing in the laboratory, significantly increasing the probability of successfully passing a complete EMI consistency test on the first attempt.

Watch this video to learn how to locate the radiation source for EMI faults

Read this practical EMI troubleshooting application guide

Watch this online seminar on practical methods for EMI diagnosis

Automotive bus - CAN/CAN FD triggering, decoding, and analysis

The electronic components and systems required by today's automotive technology are more complex and sensitive than ever before. The Tektronix MDO3000 is a six in one instrument designed to help address the testing and validation challenges of these advanced technologies. Now an instrument can be used for the following purposes:

• Debugging and validating CAN FD, CAN, LIN, and FlexRay
• High power testing of hybrid/electric vehicles
• Verify the in car wireless system
• New device evaluation (MEMS sensors, LED drivers LED

Watch this video of CAN/CAN FD protocol solution

Get a detailed understanding of our automotive solutions