MJ seriesOrdinary cylindrical mold

Operation Manual Operating Instructions

1 Sample pressing

1. Please install the mold in the order shown in Figure (1), evenly fill the powder between two gaskets 3, place the mold in the center of the tablet press worktable (if vacuum suction is required, connect the vacuum nozzle 5 of the mold to the vacuum pump), and apply the required pressure. Then invert the mold according to Figure (2), remove the mold bottom 7, place the mold withdrawal sleeve 8, place the mold on the tablet press worktable, and unscrew the tablet press screw to withdraw the sample.

technical indicators Indicators