VIP member
MR15ML
Advantages and features: CPC line rail MR15ML belongs to the micro series linear guide rail, with a combination height of 16mm and a slider mounting h
Product details
Advantages and Characteristics:The CPC line rail MR15ML belongs to the micro series linear guide rail, with a combined height of 16mm and a slider mounting hole of 25 * 25mm. It has a higher rated load than linear bearings and can withstand a certain torque, achieving high-precision linear motion under high loads.
| model | Assembly dimensions | Guide rail size (mm) | Slide size (mm) | |||||||||
| H | W2 | W1 | H1 | P | D×d×g1 | W | L | L1 | h2 | P1 | P2 | |
| MR15ML | 16 | 8.5 | 15 | 9.5 | 40 | 6×3.5×4.5 | 32 | 60 | 44 | 12 | 25 | 25 |
| Model number | Slide size (mm) | Rated load (N) | Static torque (Nm) | weight | |||||||
| M×g2 | ∅ | S | T | C100B(dyn） | Co（stat） | Mro | Mpo | Myo | Sliding block (g) | Guide rail (g/m) | |
| MR15ML | M3×5.5 | 1.8 | 3.3 | 4.3 | 5350 | 9080 | 70 | 63.3 | 63.3 | 90 | 930 |
The load force is calculated according to ISO14728, and when the rated life is defined differently, the rated dynamic load comparison is as follows:C50B=1.26×C100B
What is the relationship between CPC linear guide rail loss and
The installation and maintenance of CPC linear guides should pay attention to the method. Linear guides should be installed on a flat surface to achieve better results, which is more suitable for the sliding of components. Using linear guides can complete many types of work.
The base function of the reliable component (guide rail) of the CPC linear guide system is like a bearing ring, with a steel ball bracket installed in a "v" shape. The bracket wraps around the top and two sides of the guide rail. In order to support the components of the machine tool, a set of linear guides has at least four brackets. Used to support large components, the number of supports can exceed four. When the event components of the machine tool move, the steel balls move back and forth in the groove of the bracket, distributing the wear of the bracket to each steel ball, thereby extending the operating life of the linear guide rail. In order to eliminate the gap between the bracket and the guide rail, preloading can improve the stability of the forward guide rail system. To obtain preloading, oversized steel balls are installed between the guide rail and the bracket. The diameter tolerance of the steel ball is ± 20 microns, with a tolerance of 0. In increments of 5 microns, filter and classify the steel balls, divide them and install them on the guide rail. The size of the preload depends on the force exerted on the steel balls. If the force exerted on the steel ball by the sensor is too large and the pre load is applied for too long, resulting in increased resistance to the movement of the bracket, it will lead to balanced contamination and emotional effects; In order to improve the sensitivity of the forward system and reduce the resistance of the movement, it is necessary to reduce the preload accordingly. However, in order to maintain the accuracy and precision of the forward movement, it is necessary to have sufficient preload negative numbers, which are two conflicting aspects.
The installation of CPC linear guide should pay attention to the direction and position. Over time, the linear guide will experience varying degrees of wear, and the force on the steel ball will weaken. At this time, the guide should be replaced.
The CPC line rail MR15ML belongs to the micro series linear guide rail, with a combined height of 16mm and a slider mounting hole of 25 * 25mm. It has a higher rated load than linear bearings and can withstand a certain torque, achieving high-precision linear motion under high loads.
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-