VIP member
MSA35E
Advantage features: Yintai linear slide rail MSA35E belongs to the high assembly flange series products, with a guide rail installation hole spacing o
Product details
Advantages and Features:Yintai linear slide rail MSA35E belongs to the high assembly flange series products. The distance between the mounting holes of the guide rail is 80, and the mounting holes of the slider are 82 * 62. The motion sensitivity and positioning accuracy refer to the minimum stroke that the moving component can achieve.
| model | Dimensions (mm) | Slide size (mm) | |||||||||||||||||||||||
| height H |
width W |
length L |
W2 | H2 | B | C | S×L | L1 | T | T1 | T2 | N | G | K | d1 | nozzle specification | |||||||||
| MSA35E | 48 | 100 | 111.2 | 33 | 9.5 | 82 | 62 | M10×13 | 81 | 13 | 21 | 13 | 8 | 11.5 | 8.6 | 3.3 | G-M6 | ||||||||
| model | Slide size (mm) | Basic rated load | Allowable static moment | weight | ||||||||||
| width W1 |
height H1 |
pitch P |
E std. |
D×h×d | Dynamic load C kN |
Static load Co kN |
Mp kN-m |
My kN-m |
Mr kN-m |
slider kg |
guide rail kg/m |
|||
| single | double | single | double | |||||||||||
| MSA35E | 34 | 29 | 80 | 20 | 14×12×9 | 52.0 | 75.5 | 0.93 | 5.47 | 0.93 | 5.47 | 1.25 | 1.61 | 6.6 |
Five preparations to be made before installing the linear guide MSA35E
1、 Horizontal calibration of linear guide machine.
Requirement: Place two equal height measuring blocks and a marble ruler on the installation base surface, and place a precision level to adjust the base level. The requirement is that the base should be convex (2-3 grids) in the middle.
IILinear guide MSA35EInspection of the roughness, flatness, straightness, and appearance of the installation base surface.
Requirement: After the horizontal adjustment is completed, a laser interferometer must be used to measure the flatness of the installation base surface of the main linear guide (we usually use a linear guide surface on the right side of the column as the main guide). The allowable convexity is 0.05mm every 10m, and the allowable convexity for the full stroke straightness is 0.03mm. The roughness requirement is 1.6, and there are no casting defects in the appearance.
3、 Chamfering treatment of the installation base surface of the linear guide rail and the reference installation surface of the guide rail side.
Requirement: The chamfer radius should be less than or equal to 3.5mm. If the chamfer is found to be too large or protruding, it should be promptly treated with oilstone and file, otherwise it may cause poor installation accuracy of the guide rail or interfere with the slider. 4、 Processing of locking threaded holes for the installation base of linear guides.
Requirement: Confirm whether the position of the installation screw holes is correct, and whether the center distance between each connected screw hole is 120mm, which is greater than or less than 0.1mm. To ensure high-precision screw hole processing, it is required to use CNC equipment for positioning processing.
4、 Check the straight guide rail after unboxing.
Requirement: Check the linear guide railLinear guide MSA35EWhether there is a certificate of conformity, whether there is any damage or rust, clean the anti rust oil, remove burrs, impact protrusions, and dirt on the assembly surface.
Yintai linear slide rail MSA35E belongs to the high assembly flange series products. The distance between the mounting holes of the guide rail is 80, and the mounting holes of the slider are 82 * 62. The motion sensitivity and positioning accuracy refer to the minimum stroke that the moving component can achieve.
Yintai linear slide rail MSA35E belongs to the high assembly flange series products. The distance between the mounting holes of the guide rail is 80, and the mounting holes of the slider are 82 * 62. The motion sensitivity and positioning accuracy refer to the minimum stroke that the moving component can achieve.
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-