1. The overall transmission of bevel gears has low energy loss and high efficiency.

Traditional grinding machines require additional reducers and spindle transmission through couplings, which makes it difficult to center during installation and can easily generate noise, reducing efficiency. MTW series European versionpulverizerFor the overall transmission of bevel gears, the structure is more compact, the installation and adjustment are more convenient and fast, and the efficiency is greatly improved.

2. The internal thin oil lubrication system is advanced and reliable.

The traditional lubrication method for grinding machines is grease lubrication, which has high lubrication resistance, high temperature rise, and short bearing life. The MTW series European mill uses an internal oil pump, which can achieve lubrication of the main shaft bearings and bevel gear shaft bearings without the need for additional oil pumps or lubrication stations, greatly improving the service life of the equipment.

3. Curved air duct, with minimal air loss and good material fluidity.

The air ducts in traditional grinding machines are all straight plate air ducts. This structure has disadvantages such as resistance caused by airflow impacting the air duct plate, significant energy loss due to collisions between airflow molecules, and susceptibility to eddy currents leading to air duct blockage. MTW seriesEuropean version grinderThe air duct used is a curved air duct, with a smooth tangential airflow inlet and low resistance. The internal outlet direction is conducive to material dispersion and is not easily blocked.

4. The special grinding roller and grinding ring structure design, as well as the adjustable curved blade shovel, improve grinding efficiency and reduce operating costs.

The traditional grinding machine blade wears out quickly, and the blade is an integral blade. After the blade wears out, it needs to be replaced as a whole, which wastes materials and increases downtime for replacement. The MTW series European version grinding shovel blade is made of high wear-resistant alloy material, which has a long service life. When replacing, only the blade part needs to be replaced, which improves the material utilization rate. In addition, traditional flat shovel blades accumulate materials on a single surface after being lifted, causing severe wear in the middle of the grinding roller and ring. Curved shovel blades can guide materials towards the vertical surface, allowing the upper, middle, and lower parts of the grinding roller and ring to be ground evenly, while also increasing the effective working area and thus increasing production.

5. The particle size of the finished product can be adjusted and controlled, and the powder selection efficiency is high.

The speed of the analyzer is controlled by frequency conversion, which provides more accurate speed and better fine material sorting effect; The isolated cyclone powder collector greatly improves the powder selection efficiency, and an isolation structure is adopted between the inner cylinder and the mixed gas powder flow, which can effectively improve the powder selection efficiency and accuracy.

6. No resistance inlet volute (small observation door without eddy current)

The inner surface of the observation door panel of the traditional grinder's inlet volute protrudes outward and is not on the same plane as the inner surface of the inlet volute, which can easily generate vortex effects and increase system energy consumption. MTW seriesEuropean version grinding machineThe inner surface of the internal door panel is on the same curved surface as the inner surface of the intake volute, which can effectively avoid vortex effects.

7. Humanized design, easy to operate.

The MTW series European version grinding machine not only adopts many advanced structures internally, but also adopts a beautiful curved structure design in appearance, making the whole machine more user-friendly and reducing unnecessary damage caused by workers during operation.

8. Emphasize the concept of environmental protection

The equipment has low working noise and is equipped with advanced dust collectors, with dust emission concentrations completely lower than national environmental regulations. The airflow is drawn into the centrifugal induced draft fan through the return duct at the upper end of the large cyclone powder collector. The entire airflow system of this machine is closed and circulating under positive and negative pressure. The unique air self circulation system greatly reduces the external exhaust volume, reduces dust, and is conducive to environmental protection.

European versionpulverizerThat is, the European versionRaymondYes, it isLiming Heavy IndustryAuthoritative experts have absorbed the latest grinding technology and concepts from Europe, and have devoted themselves to developing the latest internationally leading technology with multiple independent patent rightsGrinding equipmentThis model adopts multiple latest patented technologies such as bevel gear integrated transmission, internal thin oil lubrication system, and curved air duct. Stable performance, easy operation, and low energy consumption; Adjustable and controllable particle size of finished products, widely used for grinding materials; Equipped with a dedicated dust collector, the dust emission concentration is completely lower than the national environmental protection regulations.

MTW seriesEuropean version grinderPowder machineMainly suitable for grinding and processing mineral materials in metallurgy, building materials, chemical industry, mining, etc. It can grind and process quartz, feldspar, calcite, talc, etcbariteFluorite, rare earth, marble, ceramics, bauxite, manganese ore, iron ore, copper ore, phosphate ore, iron oxide red, zircon sand, slag, water slag, cement clinker, activated carbon, dolomitegranitePomegranate stone, iron oxide yellow, soybean cake, chemical fertilizer, compound fertilizerfly ashBituminous coal, coking coal, brown coal, diamond sand, chromium oxide green, gold ore, red mud, clay, kaolin, coke, coal gangue, porcelain clay, blue spar, fluorite, bentonite, diabase, pyrophyllite, shale, purple sandstone, laminated rockbasaltic rockVarious non flammable and explosive mineral materials, such as gypsum, graphite, silicon carbide, and insulation materials, with a Mohs hardness below level 9 and a humidity below 10%. Because in regards toCalcite grinding powderExcellent performance, also known asCalcite milling machine,Calcite mill, CalciteGrinding equipmentIf you want to understand calcitePrice of grinding machineFor more information, please contact our customer service representative or call 0371-67997088 to reach out to our staff.

NTW series European versionpulverizerIt is a vertical structure with a small footprint and strong completeness. It mainly consists of a main engine, a fan, a powder selector, a bag filter, a cyclone powder collector, and a jaw typecrusher, Bucket elevator, ElectromagneticvibrateFeederComposed of storage silos, pipeline equipment, electrical control cabinets, motors, etc.

Large chunks of material are composed ofJaw crusherAfter being crushed to the required particle size, the material is sent to the storage bin by the elevator, and then uniformly and quantitatively continuously fed into the main grinding room by the electromagnetic vibration feeder for grinding. The ground powder rises with the airflow of the fan and is classified by the powder selector. The powder that meets the fineness passes through the pipeline and enters the large cyclone collector for separation and collection. It is discharged through the powder outlet valve to obtain the finished powder. The airflow is drawn into the centrifugal induced draft fan through the return duct at the upper end of the large cyclone powder collector. The entire airflow system of this machine is closed and circulates under positive and negative pressure.

MTW seriesEuropean version grinderPowder machineThe working process of the host is driven by a bevel gear integrated transmission device to rotate the central shaft. The upper end of the shaft is connected to a grinding roller hanger, which is equipped with a grinding roller device and forms a swinging fulcrum. The grinding roller device not only rotates around the central axis, but also revolves around the grinding ring, and the grinding roller itself rotates due to friction. There is a scraper installed under the grinding roller hanger, which is located at the lower end of the grinding roller. During the rotation of the scraper and the grinding roller, the material is thrown up and fed between the grinding rings of the grinding roller, forming a cushion layer. This layer is crushed by the outward centrifugal force (i.e. extrusion force) generated by the rotation of the grinding roller, thereby achieving the purpose of powder production.

The MTW series European version powder selection machine uses a speed regulating motor to drive the blades on the turntable to rotate, forming a grading effect on the powder. The speed of the blades is adjusted according to the particle size of the finished powder. When obtaining finer grained powder, it is necessary to increase the blade speed to increase the contact between the blade and the powder, so that the powder that does not meet the requirements is thrown towards the outer wall by the blade and separated from the airflow. The coarse powder falls into the grinding chamber for regrinding due to its own gravity, and the qualified finished powder is sucked into the large cyclone powder collector through the blade along with the airflow. After the airflow and powder are separated, the powder is collected.