Product model:Digital display heating typeFET-H

Equipment configuration: Magnetic stirrer host 1tower

Standard mixer 1One (specification:8Ф*10mm）

PT1000And bracket1cover

Main performance characteristics

1、LCDDisplay interface, real-time viewing of speed and temperature values, monitoring of working status;

2The residual heat warning function displays the residual temperature of the heating plate after shutdown, “HOT”Tips to prevent burns;

3The brushless DC motor operates quietly, requires no maintenance, and is safe and explosion-proof;

4Built in temperature sensor for precise temperature control;

5Independent safety circuit, set the safe temperature of the work panel, and automatically cut off power protection when the safe temperature is exceeded;

6Divided intoA、BTwo working modes, which can respectively control the temperature of the stirring liquid in the dish and the magnetic stirrer heating plate;

7Automatic storage function, the data used by the staff can be automatically saved each time, and to avoid erroneous storage operations, the confirmation of various parameter settings is limited and the work runs smoothly10The automatic storage protection function will only be available after seconds;

8、CPUUsing imported original industrial grade chips,32Bit processors that can adapt to industrial environments with high electromagnetic interference;

9The strong magnetic magnet inside the equipment effectively prevents the agitator from escaping;

10The whole machine is designed to withstand high temperatures and corrosion, with a heating temperature of up to340The stainless steel disk surface is beautiful, resistant to high temperatures and chemical corrosion, and the aluminum alloy shell has good heat dissipation performance. The sprayed surface is resistant to chemical corrosion.

Technical Parameter

precautions

1When the stirring element jumps or does not stir during stirring, please cut off the power and check whether the bottom of the beaker is flat and the position is correct. At the same time, measure whether the current voltage is220V±5Vbetween;

2The heating time should generally not be too long, intermittent use can prolong the service life, and heating should not be done when not stirring.

3Continuous operation at medium speed72Hours, high-speed operation can work continuously48Prevent severe vibrations during work hours;

4Electricity usage: The power socket should use a three hole safety socket and must be properly grounded;

5The instrument should be kept clean and dry. It is strictly prohibited for the solution to flow into the machine to avoid damaging it. The power should be cut off when it is not working.