Maintenance of air compressor：
air compressorAdequate maintenance is necessary for the best working condition. Proper maintenance can increase the service life of the entire machine and greatly save downtime due to malfunctions.
If the air compressor is installed in a clean and low-temperature environment, the service cycle can be appropriately extended. Develop the correct service cycle based on your usage environment.
Daily operation: Before starting, drain the condensate at the bottom of the oil and gas separation cylinder until oil flows out, and check if the oil level is in the correct position.
After startup: Observe the pressure displayed on the control panel, check the operating temperature, inspect the overall condition of the machine, the outer surface of the cooler, the condition of the bolts, and whether there is any leakage.
1. The operation and maintenance of the compressor must be carried out by qualified personnel;
2air compressorCannot be reversed. After the initial start-up or maintenance of the electronic control system, it is necessary to confirm whether the rotation direction of the motor is consistent with the specified direction before starting the compressor;
3. When disassembling high-temperature components, it is necessary to wait for the temperature to cool down to ambient temperature before proceeding;
4. Recommend using specialized oil for screw air compressors. Different grades of lubricating oil are not allowed to be mixed;
5. Do not make any modifications or add any devices to the compressor that affect safety and reliability without the permission of the manufacturer;
6. Original spare parts for compressors are specially designed and manufactured, and it is recommended to use authentic spare parts to ensure the reliability and safety of compressor operation;
7. It is absolutely not allowed to block the suction port of the compressor during operation;
8. Compressed air is absolutely not allowed to be used for breathing unless it has been indicated that it can be used for breathing;
9. The compressor cannot be operated beyond the specified pressure and temperature;
10. Once the compressor is found to be working abnormally, it should be stopped immediately and the abnormality should be eliminated in a timely manner;
11. Repair the compressor with the correct tools;
12. After maintenance and before starting up, confirm that all safety devices have been reinstalled and tools have been removed from the compressor.