1 Complies with the national standard GB/T 6536 "Determination of Distillation Methods for Petroleum Products". Widely used in departments such as petroleum, chemical, metallurgy, power, transportation, commodity inspection, and scientific research.

2 Applied to the distillation characteristics of gasoline, diesel, kerosene, fuel oil, and other mineral oils at atmospheric pressure.

3 The heating electric furnace wire is encapsulated in quartz glass tube, with no open flame, safe and reliable, and long service life

4 The heating electric furnace can be adjusted up and down with a knob, making it easy to adjust the optimal position of the distillation flask

5 The power of the heating electric furnace can be continuously adjusted from low to high through the adjustment knob on the control panel,
And displayed through the electricity meter

6 Configurable components suitable for different standards.

Technical Indicators

1 Temperature measurement range: 0-400 ℃ Resolution: 0.1 ℃.

2 Volume detection range: 0-100ml Resolution: 0.1ml.

3 Cooling method: Circulating water or compressor cooling (DANFOSS)

4 Initial distillation time: 5-10 minutes (user-defined).

5 Operation mode: manual

6 Data parameters: Digital display reading

7 Usage environment: The ambient temperature is 15-45 ℃, and the relative humidity is less than 80% RH.

8 Power supply: AC220V ± 10%, 50 ± 2Hz.

More recommendations:Automatic Distillation Range Tester Fully automatic kinematic viscosity tester