Manufacturer of LCUVC-120 UV Disinfector for Direct Drinking Water Production

Manufacturer of LCUVC-120 UV Disinfector for Direct Drinking Water Production

With the increasing emphasis on environmental protection and people's concern about the environmental situation, sewage discharge standards are becoming increasingly strict. Institutional sewage contains a large amount of pathogenic microorganisms and toxic substances. If discharged directly without effective treatment, it will cause pollution to the surrounding environment. Therefore, whether the sewage treatment of the institution meets the standards will be an important basis for whether the institution can be established.

The sewage of dental hospitals mainly comes from the discharge of outpatient rooms, which is a low concentration sewage containing various pollutants such as drugs and disinfectants, as well as a certain amount of bacteria. If the sewage is directly discharged into the water body without treatment, it will cause a certain degree of pollution to the surrounding water and soil, thereby endangering people's daily lives.

According to the Pretreatment Standards for Institutional Water Pollutant Discharge, the outpatient sewage discharge should meet the following standards: 500ml of each sample for three more times for inspection, and no intestinal pathogenic bacteria and tuberculosis bacteria should be detected. All medical wastewater within the institution must be input into the treatment tank through dedicated pipelines for disinfection before being discharged. The sewage treatment equipment used by the institution must meet the following requirements.

UV sterilizer is a high-tech product developed by our company that specializes in quickly sterilizing drinking water. This product uses American imported (lightsources) ultraviolet lamps, with a lifespan of over 12000 hours during the sterilization period.
Considering the pressure of water in practical applications, we have designed an elliptical head for the ultraviolet sterilizer. This not only can withstand greater pressure, but also leaves no dead corners during the sterilization process, enabling comprehensive sterilization. And before the UV sterilizer leaves the factory, we will try to press it to around 16 kilograms to ensure that there will be no water leakage or other issues caused by excessive pressure during use.