Mask tensile testing machine Mask tensile testing machine

Mainly for conducting tensile tests on various masks and protective clothing such as medical masks, disposable masks, protective goggles, and protective clothing. In addition, mechanical property tests such as stretching, tearing, elongation, and peeling can also be conducted on products such as plastics, woven bags, non-woven fabrics, plastic films, products, PVC pipes, paper and cardboard, woven bags, packing belts, tapes, adhesives, etc.. The design of the testing machine host and auxiliary equipment integrates our company's advanced technology. The host adopts a structure of three columns surrounding a ball screw, which has the characteristics of high rigidity, durability, beautiful appearance, easy operation, stable and reliable performance.

The raw material of the mask is non-woven fabric, which must comply with the national standard GB2626. According to this standard, the respiratory protective equipment self-priming filter anti particle respirator standard 6.11 method should be tested. Each headband, buckle, and other adjusting parts of the mask should not slip or break when subjected to the tension specified in Table 6. Test according to method 6.11. Each headband, buckle, and other adjusting components of the face mask should not slip or break when subjected to the tension specified in Table 6.

Table 6 Tension that Headbands Should Bear

Mask types: 10N for 10 seconds

Disposable face mask: 50N for 10 seconds

Removable face mask: 50N for 10 seconds

Full face hood: 150N for 10 seconds

A new material testing machine that combines electronic technology with software technology and mechanical transmission, using a stepper motor system as a precise power source; Adopting precision ball screws and guide rods, using a 0.5 level precision force sensor, and then using a high-precision force measurement system to achieve precise measurement.

The HT-101P medical mask tensile testing machine adopts a single column structure and is mainly used for testing materials with a load below 10KN. It has a sturdy structure, easy operation, and simple maintenance, making it an ideal testing instrument for mechanical testing in various factories and enterprises.

The HT-101P medical mask tensile testing machine has a wide and accurate loading speed and force range, with high accuracy and sensitivity in measuring and controlling load, deformation, and displacement. It has stress, strain, and displacement modes, and can calculate parameters such as maximum force value, tensile strength, bending strength, compressive strength, elastic modulus, elongation at break, yield strength, etc. It is suitable for mechanical property testing and analysis such as tension, compression, peeling, tearing, and shearing.

Mask tensile testing machine execution standard

YY0469-2011 Medical Surgical Mask

YY/T 0969-2013 Disposable Medical Masks

GB19083-2010 Technical Requirements for Medical Protective Masks

GB/T 32610-2016 Technical Specification for Daily Protective Masks

GB/T2626-2019 Respiratory Protection Self priming Filter Anti particle Respirators

GB 19082-2009 Technical Requirements for Medical Disposable Protective Clothing

GB 10213-2006 Disposable Medical Rubber Inspection Gloves

Tensile testing machine parameters

model: HT-101PT

Maximum test speed: 500mm/min; Choose the largest 1000mm/min

Power amplification factor: X1, X2, X5, X10, X20, X50, X100 and other seven gear automatic shifting and switching throughout the entire process

Force accuracy: within ± 1% of the displayed value

Displacement accuracy: within ± 1% of the displayed value

Deformation indication accuracy: within ± 1% of the indication

Deformation measurement range: 2% to 100% FS

Displacement resolution: 0.001mm

Effective force measurement range: 0.4% to 100% FS

Power decomposition degree: 1/200000

Test speed: 0.1mm/min